[TGPB27]

my luxe even on uncapped semi still seems its shooting slow(i have fast fingers so thats not the issue)..what is some things you can adjust as far as settings to bump it up..as far as changing other settings in trigger Dbounce or whatever...

[specopsdeath2]

check your feathertouch screw, that would be capping your rof depending on how far in it is. eyes might be dirty as well, clean those or even turn them off to see if that helps at all

[TGPB27]

Is there anything in any modes to make it quicker such as adjusting the bounce

[specopsdeath2]

Originally Posted by TGPB27

Is there anything in any modes to make it quicker such as adjusting the bounce

Bounce will do just that..make the board more sensitive to bounce which, if you play tournys, is illegal. So no, that's not a valid option.

[bushhog750]

Originally Posted by specopsdeath2

check your feathertouch screw, that would be capping your rof depending on how far in it is. eyes might be dirty as well, clean those or even turn them off to see if that helps at all

Isnt the FT screw either in or out, I didnt think it was adjustable. OP if your manifold screw is turned in to far that could also limit your ROF.

[carolinaragetc]

FT isn't adjustable... It's either in or out...

[bushhog750]

Originally Posted by carolinaragetc

FT isn't adjustable... It's either in or out...

Thats what I thought.

[specopsdeath2]

Sorry, manifold screw.


I had a long day, gimme a break

[PRyAnKeE]

*Tip to check the rate of fire double tap the power button.. It will tell you the last ROF

[DC19]

If your eyes are defaulting your gun will only be able to cycle as fast as the By Pass BPS is set.

[TGPB27]

Which bounce settings do you tweak with to make it more sensitive

[specopsdeath2]

Originally Posted by TGPB27

Which bounce settings do you tweak with to make it more sensitive

Why make it more sensitive...? You want it set so it doesn't bounce. Find the manifold screw and turn it out. As well as make sure your eyes are not dirty/defaulting.