[GraniteGargoyle]

Ok pretty sure is the solenoid at this point. Looking at my other solenoids there are small holes that have what appears to be ball bearings in them. The solenoid on the threshy does not have the ball bearings things in the holes. Wondering if that is allowing the air to escape when the trigger pulled.

Anyone able to verify this?

[GraniteGargoyle]

Originally Posted by Str8t outta compton

Just put the g3 noid on the threshy ya big dummy!

Thought about it but do not want to mess with the G3 when it is working so well. Phantom is picking me up a noid so I figured I will just be patient

[X20DTL]

Originally Posted by Str8t outta compton

No

yes

[paintballaddict80]

I wouldn't put the g3 noid in there. From what I've been told the wires from the g3 noid won't reach to where you need them to.

I never cut notches into the bumper or bolt lol never would even attempt that.

Also have you replaced the reg seat yet? Because that reg right now wouldn't shoot anything below 400 fps which is why I never used it.

I did at one point take apart the noid to try and find the problem, but I couldn't so I put it back together the exact way it came apart, and I still had the same problem.

Hope that helps in any way.

[GraniteGargoyle]

Phantom is getting me a red reg seat and a new Noid, so just waiting atm Still have my F7 and G3 to play with so that helps me to be patient

Yeah for some some reason there is a chunk missing out of the bumper.

I would have to say, with my limited knowledge, it's the noid. Once I get it installed I will update

[paintballaddict80]

Ya the solenoid is what I figured it to be. Keep me updated on it and I'll help where I can.
Off topic, has your wife transferred the money to PayPal? If not, no worries I'm patient haha.

[GraniteGargoyle]

She will do it shortly, we just got back from Church

[paintballaddict80]

Ok sounds good

[GraniteGargoyle]

Originally Posted by Str8t outta compton

Church.....eeewwwwwww Religion is just a control mechanism!

I have no particular religion and will only attend churches that teach the Bible. No speaking in tongues, screaming, rolling on the floor, and stuff like that. Just learning from the Book. I have found one where I live that does that. It has helped me deal with the way people act now days and learn some patience....with most

[GraniteGargoyle]

Just posting an update instead of leaving this hanging. I will "piss off" again after this.

The Threshy is working. It was not the noid or reg. I did go ahead and put the new ones in since Phantom was nice enough to pick them up for me and it is always good to have shiny new parts.

The problem appears to have been the middle Oring on the bolt. It was the wrong size. All I did originally was trade out the same size, but newer. When I looked it up, I needed a fatter Oring. Replaced it and it took right off. Just got to get it Chrono'd.

Thanks for all the help guys. If you need anything, just PM me. I will lurk.
Thanks to those that have sent stuff. It has helped me greatly and I will try to repay some how.

[Tvveak]

Granite, you can stay. It's essentially "initiation" from R/T. I went through the same thing and almost quit but now it's a big happy love fest xD

[Trigger Finger]

Originally Posted by Tvveak

Granite, you can stay. It's essentially "initiation" from R/T. I went through the same thing and almost quit but now it's a big happy love fest xD

yeah same here...... post as much as you want