[vivalacan55]

does the stock dm5 board have psp mode? or any type of ramping?

[benjabino]

#1: Read the first post of this thread.
#2: Read the Ultimate Sticky (DM/PM Manual Downloads)
Here is the manual thread.
https://www.pbnation.com/showthread.php?t=1452296

Cheers,
Ben

[dstank269]

I just got a new dm10 and I was wondering if I should stick with the dye slick lube or get anything better and if so what?

[benjabino]

Originally Posted by benjabino

#1: Read the first post of this thread.
#2: Read the Ultimate Sticky (DM/PM Manual Downloads)
Here is the manual thread.
https://www.pbnation.com/showthread.php?t=1452296

Cheers,
Ben

Originally Posted by dstank269

I just got a new dm10 and I was wondering if I should stick with the dye slick lube or get anything better and if so what?

To quote my post directly above yours... haha
have a Merry Christmas and a Happy New year!

[sccrchrs22]

my gun isnt shooting the trigger is jammed... any thoughts?

[sccrchrs22]

is the dye 09 model gold

[sccrchrs22]

the tirgger jams upp often and i have tried everything i can think of via utube and what not

[sccrchrs22]

I have 5 brand new ipod nano chromatics for sale. They are black and come with head phones, a clear case, and a usb drive. they are opened just to make sure that they work, but as i said they are literally brand new. i will email pictures if you are interested so you can see them either to a cell phone or to an email.

if you have any interest in buying them or trading for them let me know. i will trade for just about anything other than your mother. haha




thank you all.


Chris

[ScottyJoe]

I was in the middle of a game yesterday and all of a sudden the gun started choking and wouldnt shoot the ball far then wouldnt come outta the barrel after a couple shots all the balls would fly out and it would shoot good for a couple more shots then mess up again. i had about 2500 psi still

Any idea? im about to lube it up

I took out the dentent and it was cracked..could this of caused it? if so will the dentent from 8/9/10 fit my dm11?

[RabidHobo]

I don't use AIM anymore, shoot me a PM on here and I can help all the DM owners.

[Csiebels]

why does my dm14 asa sometimes lock up on me when trying to air it up? please pm me a solution! and when i air my marker up it leaks until the asa is fully on whenever it doesn't lock up.

[RabidHobo]

Originally Posted by Csiebels

why does my dm14 asa sometimes lock up on me when trying to air it up? please pm me a solution! and when i air my marker up it leaks until the asa is fully on whenever it doesn't lock up.

I would try to clean and lube the region pistons. Sounds like the low pressure reg is sending too much pressure to the solenoid not allowing it to cycle. Try cleaning and lubing both regs and resetting the lpr. After cleaning the regs set them back to the lowest setting (for all other dms it has been all the way in) and set them according to the manual. I don't know what is stock for a dm14. Also wouldn't be a bad idea to lube and replace any o rings in the asa. Good luck.

[Pakistani]

Originally Posted by Csiebels

why does my dm14 asa sometimes lock up on me when trying to air it up? please pm me a solution! and when i air my marker up it leaks until the asa is fully on whenever it doesn't lock up.

this is sadly a common issue, but usually it's caused by running a HP tank through the ASA. i believe the most common solution is that you should be running a lower pressure tank.

[paintballstunna]

I have a dm 14 and having issues getting the eyes to work properly. The eyes seem to work fine until I put the eye pipe into the gun. I have replaced both the battery and the eye pipe and I am still getting the same issue. I have cleaned out the eyes thoroughly but not taken apart the grip frame. Any suggestions would help out a lot!

Thanks

[DyeTechSupport]

If you guys have any technical questions about your Dye or Proto marker feel free to PM me!

[I_BUNKER_FAT_KIDS]

I know this thread is old and hasnt had much traction but i have alot of experience with the older dye matrix markers dm4-7 especially. I have played with nothing but dms since 2004.

If anyone needs help fixing / repairing one of these hit me up !!

[shamma]

how do i test the lpr on a dm7?