DM14 settings with Billy Wing Bolt

blocksta · 04-24-2014, 08:56 PM

Just received my new DM14 with a BW bolt. Need to remove the stock bolt and install the BW, bbut do not know where to start with settings and LPR adjustments. Please Help

grss429 · 04-24-2014, 09:24 PM

start at...

dwell 21

lpr 2 1/2 turns

FreshlySnipes69 · 04-24-2014, 11:12 PM

Once u get it installed could u pls tell me what the Max ROF is in Full auto mode. My stock bolt will only go up to 25 before it won't move.

FreshlySnipes69 · 04-29-2014, 12:35 PM

Quote:

Originally Posted by blocksta

Just received my new DM14 with a BW bolt. Need to remove the stock bolt and install the BW, bbut do not know where to start with settings and LPR adjustments. Please Help

How do you like it compared to the stock bolt? What's ur max ROF on auto before the bolt sticks?

PhillyDipper · 05-08-2014, 09:51 AM

just watched your LPR video. Answered basically every question I had. I also just purchased the BW for my dm14. and was curious as to how to go about fine tuning. Thanks again!

FreshlySnipes69 · 05-08-2014, 01:51 PM

[quote="PhillyDipper;80713660"]just watched your LPR video. Answered basically every question I had. I also just purchased the BW for my dm14. and was curious as to how to go about fine tuning. Thanks again!

[/QUOTE

I'm getting one this week too!

M98custom1212 · 05-08-2014, 10:33 PM

Quote:

Originally Posted by FreshlySnipes69

Once u get it installed could u pls tell me what the Max ROF is in Full auto mode. My stock bolt will only go up to 25 before it won't move.

You can't go over 25bps because the solenoid is capped at 25cps

ParaDM · 05-12-2014, 06:11 PM

Just got my billy wing bolt today to

can't wait to try it out this weekend

Nashorn · 05-12-2014, 11:37 PM

I'm picking one up at Living Legends this weekend. I can't wait to break that sucker in.

FreshlySnipes69 · 05-13-2014, 08:29 PM

Quote:

Originally Posted by M98custom1212

You can't go over 25bps because the solenoid is capped at 25cps

Why do they have the ability to change the ROF any higher if the solenoid won't go higher? That's dumb

M98custom1212 · 05-14-2014, 08:41 AM

Quote:

Originally Posted by FreshlySnipes69

Why do they have the ability to change the ROF any higher if the solenoid won't go higher? That's dumb

I couldn't tell you on that part.

jonchavez1 · 05-19-2014, 10:58 PM

so is it worth getting the billy wing bolt or not?

FreshlySnipes69 · 05-19-2014, 11:02 PM

Quote:

Originally Posted by jonchavez1

so is it worth getting the billy wing bolt or not?

I'm getting one. It's only $100. I'd rather get a Pooty polish for $30 but it voids the dye warranty so it's not worth saving $70 for no warranty. From what I have read and videos I have seen it is a solid upgrade. I'm getting mine this weekend

lakemuska · 05-19-2014, 11:36 PM

Mine should get here between tomorrow-Thursday

FreshlySnipes69 · 05-19-2014, 11:45 PM

Quote:

Originally Posted by lakemuska

Mine should get here between tomorrow-Thursday

That's dope. Please let me know what you think of it. I'm really curious to know if it will allow a higher rate of fire.

lakemuska · 05-20-2014, 12:23 PM

Out for delivery today, wondering whether I should lube it before trying it or not...

ProtoSkillz · 05-20-2014, 03:28 PM

Quote:

Originally Posted by grss429

start at...

dwell 21

lpr 2 1/2 turns

This. and listen to anything this man says.

jojo750 · 05-20-2014, 04:33 PM

Quote:

Originally Posted by lakemuska

Out for delivery today, wondering whether I should lube it before trying it or not...

Don't know if you were serious or not.
But of course, lube the bolt before putting it in the gun.

lakemuska · 05-20-2014, 06:21 PM

Quote:

Originally Posted by jojo750

Don't know if you were serious or not.
But of course, lube the bolt before putting it in the gun.

lol ya never know if something might come set ready to go....

So it came and it looked pretty dry so I pulled it apart and unfortunately found an oring busted

so replaced it lubed it and shot 100 shots through see how she went.

LPR currently at 1.5 turns, the consistency wasn't amazing. Didn't matter if I had it at 1.5 or 4 still seemed to be 295-280 back and forth so maybe my paint wasn't to good, though it looks fine.

[img]http://s21.************/51ygmyp9f/WP_20140520_13_54_43_Pro.jpg[/img]

FreshlySnipes69 · 05-21-2014, 09:13 PM

Consistency should get better when u increase the dwell

FreshlySnipes69 · 05-29-2014, 03:25 PM

Quote:

Originally Posted by lakemuska

lol ya never know if something might come set ready to go.... So it came and it looked pretty dry so I pulled it apart and unfortunately found an oring busted

so replaced it lubed it and shot 100 shots through see how she went. LPR currently at 1.5 turns, the consistency wasn't amazing. Didn't matter if I had it at 1.5 or 4 still seemed to be 295-280 back and forth so maybe my paint wasn't to good, though it looks fine.

Just ordered my billy wing yesterday! Excited to get it. Any updates on your bolt? Did you get the kinks worked out?