[crwilson101]

I was playing with my etha over the weekend and the marker stop shooting to me it seem like the bolt was sticking and after trying to shoot the marker a few more times to un stick the bolt a leak ocured threwout the gun i took the marker apart and it seems like its leaking close to or on the solenoide thhe gun is not even a month old and only has around 5 cases threw it..
Please help i checked the orings and everything seemed to be in the proper locations and no signs of wear on the orings

[Apewar]

did you check the springs?

[crwilson101]

wat springs in the bolt? would that really matter if its leaking around by the solenoid

[Kingwood]

If you unscrew the bolt there is a small spring towards the back. That may be bent and I've heard of a few doing that. I too am having this issue right now and can't figure it out. All o-rings fine, all springs fine, leaks EVERYWHERE. Did you notice a sound on yours like it was recharging w/air by chance?

[Kingwood]

Oh and now when I turn it on and turn the eyes off, no air, I can't hear the usual "click" like I used to. Is that a 'noid? You might want to try yours out to see if that's the case on yours too.

[scsimodo]

did you guys try a fresh battery? that's the first thing I try when I have problems with my marker an don't have a clue what is causing it.

when you don't hear click of the noid it's often a flat battery...

[Nicky T]

Okay, let's get you guys sorted:

crwilson101:
- Register the marker for warranty via: https://warranty.planeteclipse.com/site/signin
- Clean off any lube on the actual Bolt, bolt guide or bolt bumper and keep these parts dry.
- Check that your Inline Regulator Adjuster Screw is set correctly at 3.5 turns in.
- Check your poppet spring for length and straightness and replace with the spare (included in your Etha Spare parts) if necessary.
- Replace the number 010 o-ring on the front of your firing poppet.

Kingwood:
- Register the marker for warranty via: https://warranty.planeteclipse.com/site/signin
- Check that your Inline Regulator Adjuster Screw is set correctly at 3.5 turns in.
- Describe where the leak that you are experiencing is coming from so that we can best assist you.
- The lack of audible click for the solenoid is completely NORMAL as the solenoid functions using air assistance (when the marker is gassed up).

Nick

[crwilson101]

very stupid question but i can not find where the serial number is located..

[scsimodo]

next to the feedneck on the marker body, underneath the feedneck screws...

[crwilson101]

thank you scsimodo. And Nicky T you are purely amazing i did everything you told me to do and the gun is in working order thank you so much.. the spring was a little bent and the oring had alot of play in it. Thanks again!

[Nicky T]

You are very welcome - we're here to help

[rocket21]

Nicky

If we paint the frame of the Etha does that void the warranty?

Rocket

[Nicky T]

Originally Posted by rocket21

Nicky

If we paint the frame of the Etha does that void the warranty?

Rocket

Rocket,

Yes!

Nicky T

[Egos4flifeguy]

Originally Posted by Nicky T

Rocket,

Yes!

Nicky T

If I have a 09 geo, and it still has the warranty card in the manual, gun hasnt been used since 09, well then do I still have a warrenty? Or warrenty for parts? Or no warrenty at all?

[Nicky T]

Consulting my diary i see that it is now 1st June 2012; sadly your Geo9 is no longer covered.

Nicky T