Originally Posted by CAB-Power
Rob, you said by "leaving only 1 silver shim inside" I have no idea what that even means lol but thanks for the adv, will get it set up at 550, thanks!
haha no worries. If you need help adjusting the output pressure, give us a call when you receive it and we can walk you through the steps over the phone. The regulator you purchased is adjustable in output pressure, meaning you can tailor the output to any marker you decide to shoot. For egos, I recommend 550psi. At that pressure the marker will work no matter what upgrades or board settings you decide to use. Its just a matter of making sure there is no pressure in the tank, removing the set screws in the bonnet (top half of the regulator), unscrewing it off the reg body, look down in the reg body thats still mounted in the tank and remove 2 of the silver shims that you will see inside. The manual will also have instructions on how to do it.