Matrix DM3 issues

Kapapalani · 06-22-2011, 12:34 AM

Ok My Matrix Dm3 was leaking like crazy but I fixed it flippen o-ring change out BUT gun won't fire. Air it up & bolt just shoots out but gun doesn't fire. Any help

BonesJackson · 06-22-2011, 07:15 AM

Bolt sticking forward? Your LPR is either not working or is too low. Turning your LPR up will make the bolt suck back and should make the gun shoot unless your LPR is broken.

If it is broken, it's likely an easy fix.

Kapapalani · 06-22-2011, 11:12 AM

Ah Ok I think my LPR is broken then cause I adjusted back & forth & nothing. Ok well thanks I'll try that.

Kapapalani · 06-22-2011, 01:27 PM

I push my bolt in & turn my gun on. Then I pull the trigger but the bolt doesn't react? Is that the cause of LPR being broke? I would think my bolt would react to my board regardless of LPR?

BonesJackson · 06-22-2011, 03:14 PM

Quote:

Originally Posted by Kapapalani

I push my bolt in & turn my gun on. Then I pull the trigger but the bolt doesn't react? Is that the cause of LPR being broke? I would think my bolt would react to my board regardless of LPR?

The LPR is what cycles the bolt.

SPYDRMN22 · 06-23-2011, 05:33 AM

I would just break everything down since you don't know how the previous owner treated the gun,and replace all orings and lube everything,then air it up and troubleshoot it,instead of going 1 by 1 wasting time. You dont want to fix 1 thing then a week later during a game something else goes bad,make it fresh again!