[di$TOrTed]

Ok. My friend bought a used Alias. We can't get any kind of decent speed out of it. It only does about 8bps. It is a 127.5c frenzy board. We turned the cap off, tried it in ramping and semi. We mess with all the delays and debounces and everything including having them turned up and down. It is just slow. The marker fires smoothly and at a good consistent velocity, it is just slow. I already checked the settings thread and we tried different sample settings and it is still slow.

Thanks for the help

[gamer565]

put everything back to stock settings...sounds like a eye problem...check the wire make sure there not pinched and make sure the eyes are alined

[di$TOrTed]

this is kinda dumb...... but what are the stock settings for this version of the frenzy?

thanks

[gamer565]

Originally Posted by di$TOrTed

this is kinda dumb...... but what are the stock settings for this version of the frenzy?

thanks

read the stick...all 127's are the same

[jtprotium the second]

check to see if your screw on your trigger is n't to far screwed out. If it is, the gun wont register every shot because the microswitch is already barely clicked.

[di$TOrTed]

ok well i took the gun apart and i found out that the battery harness is totally messed up......... does anyone know a good site that sells timmy parts? i have been looking and found other kinds of harnesses but not the one i need.......

[gamer565]

crankwalk in NIB forum or pbwarehouse

[di$TOrTed]

ok i found them on criticalpaintball for $25.......... is that normally what they go for? thats butt expensive

edit- nevermind getting one from crankwalk

thanks guys

[gamer565]

Originally Posted by di$TOrTed

ok i found them on criticalpaintball for $25.......... is that normally what they go for? thats butt expensive

Alias/D2 battery harness ($10.00)