[bnb5550]

CLICK ON PICTURES TO ENLARGE!

Bolt:

Get out your purdy Onyx


Unscrew the screw on the back plate


Push the bolt assembly out the back and wipe off all old lube



Remove back plate by removing the three small set screws, and then pulling directly backwards


Unscrew the two sections of the valve chamber


Unscrew your bolt (if you cannot get it off by hand, you can use a nut driver on the back of the ram [where you just took off the back plate] to get a grip on it)


Slide the front half of the valve chamber off the front


Remove the poppit and spring


Push the ram out the back


Now you have everything apart


Wipe off old lube and lube the poppit with Dow55 as shown


Place the sping back in the chamber in its spot, as shown


Put the poppit ontop of it


Wipe off old lube and lube the back part of the valve chamger with Dow55 as shown


Screw the two halves of the valve chamger together


Wipe off old lube and lube the ram with Dow55 as shown

[bnb5550]

Place the ram through the back


Screw the bolt back on the ram. Use a 1/4" nut driver on the back of the ram to get it on nice and tight, you do NOT want it coming loose or coming off during firing


Re-attach the back plate so the bottom part of the plate with the spot for the screw aligns with the air hole in the back part near the ram as shown and replace the three small set screws


Wipe off old lube and lube all except the bolt with Dow55, use Dow33 on the bolt, as 55 on it can cause some drop off. Dow33 = bolt; Dow55 = everything else.


Put it back in the gun and screw it back on, and you're good to go.

HPR-

Take th HPR off the gun


Unscrew the two halves


Take out the adjustment screw



Push out the internals


Wipe off all lube and relube with Dow55 and reassmble, simple as that.



Will do the LPR once I make my pressure gauge for the LPR so I know what to set it at once I'm done...

[paintballkilla*]

very helpful

[96 Ls lnteg]

your the mother****in man..

[arc1880]

Awesome .... this needs to be stickied ....

[alphanu22]

good job...

[DUCKY21]

WOW!!! ur my hero....

[animalstyle]

sticky

[bimbot]

I was afraid to take mine apart....




UNTIL NOW!!!!....THANKS!!!

[ADOLF]

Sticky Ftw!

[E-S.W.A.T]

lol. dude the onyx seems REALLLY complicated. i think i will stick with the classic poppit markerslol

[bnb5550]

Originally Posted by E-S.W.A.T

lol. dude the onyx seems REALLLY complicated. i think i will stick with the classic poppit markerslol

You have to be kidding...

[bnb5550]

Updated.

[manike]

Stickied.

[bnb5550]

Did I just make a manual before BL did?

[96 Ls lnteg]

Onyx How To Maintain Hi-Res Version

[manike]

It's nice being able to go through those hi res pictures like that.

[Crim's Skilla]

Honestly bro that is probably on of the best if not the best Maintenance threads i have viewed so far.........A+++++ in my book bro

[Oiva]

so true, i love it when people take pics

[96 Ls lnteg]

Originally Posted by manike

It's nice being able to go through those hi res pictures like that.

ohh yah. I used it last night...

[moosecakes]

spring stack orintatin place. bottom to top would be great.