Just got an RF transmitter kit to install on my ego 09. There is no 3 pin harness that can fit the Ego 09 board connector so i have to use the jump harness. When i connect the harnes and the board and when everything is in place, I power on the marker , turn off the eyes to test and IT SHUTS DOWN THE BOARD...no matter how many times I try it , it seams there is an overpower to the board it self that drives the shut down
What to do ? any chance to make it work ? or I just lost 20$ ?
Can someone verify the following steps whether they are correct?
1. turn on marker
2. while holding down the reverse button, turn on z2
3. wait for orange light to blink
4. fire marker
5. light on z2 will turn blue
6. turn off z2
anyone know whats going on with my z2? put in brand new duracell pro cells my company orders straight from duracell in this sunday. it was off and in my gearbag and tonight i turned it on and it's blinking red ... -.- do i have to take the battery harness off when im not using it??
I wanna know if my LTD kit will work in the new z2 loader??
I currently have the LTD kit installed in my original Prophecy....it seems like it should work...minus the MIC on the LTD board is on the bottom and it seems like a clearance issue
Hey I have an empire prophecy that I just picked up. The wires on the battery harness were pretty stripped and ended up getting detached and is not functioning. If anyone can let me know where I can buy this piece/anyone on here that has one would be appreciated.
Hey I have an empire prophecy that I just picked up. The wires on the battery harness were pretty stripped and ended up getting detached and is not functioning. If anyone can let me know where I can buy this piece/anyone on here that has one would be appreciated.