I'll be teaching you how you can order 100 of each oring for the timmy and only be spending a measly 20 dollars. I put this together real fast.
First goto www.mcmaster.com
Then goto the search bar and type in o-ring and press enter
Then see where it says Type and then oring with this picture? click it
Then click the round oring
Then find the bar that says AS568A Dash Number. Drop it down to the size of the oring you want.
Then click Buna-N. And to get the 006 teflon orings just click on PTFE instead of buna n
Then click Standard.
Then to the left hand side put how many bags you want, there are 100 orings in each bag. Then you click add to order.
Viola. These are all the orings i need to rebuild my timmy like 100 times
. Only for 18.29 plus a couple bux for shipping.
NO more need to get ripped off to only rebuild you timmy 2 or 3 times.
BTW make sure that the Durometer(Hardness) is Shore A: 70
You can also buy X rings for a double seal but they are a little more. Have fun.
To get the teflon 006 orings just click on PTFE instead of Buna N
Also these kinds of orings work for all other markers too, just get the size of the orings an have at it.
2k2 oring sizes straight from the manual ... dunno what the 2k4 sizes are
Bolt (3) .......015
Poppet (1) ....004
Ram Front (1) ...006
Ram Rear (1)......011
Pressurized Sleeve (2).......015
Sleeve End Cap (1) ....011
Cup Seal (1)......... order from Delta
HPR Housing (1)..016
HPR Piston (1) ........113
HPR Pin Valve Base (1) ......010
HPR Pin Valve (1).......... 006 Teflon
LPR Housing (1)......016
LPR Piston (1) .....113
LPR Pin Valve Base (1) ..010
LPR Pin Valve (1) ........... 006 Teflon
Regulator Base (2).......015