the order that the settings go in are..
(set to MS meaning millaseconds.. i think.. )
dwell-the board will add a 2ms as a default, so if u want a dwell of 6 pull the trigger 4 times and hold for the dwell to equal 6.
(light will blink)
eye delay-the board will add 0 defualt to this, but each pull equals 5ms, so if u want a eye delay of 10 pull the trigger 2 times and hold (light will blink)
debounce-the board will add 2ms as a default, so if u want your debounce 10ms pull the trigger 8 times and hold to equal 10ms. (light will blink)
eye byepass- this is the time it takes the board to read that u want the eyes turned off. every pull on this equals 1/2 a second, so if u want a eye byepass of 3 seconds pull the trigger 6 times and on the 6th hold till the sear clicks.. (after turning off the eyes u turn the marker off then back on to turn the eyes back on ) then.. your rippppiinnnnn
hope this helps
-- vette --