|
.050" for the microswitch engagement screw (on some models the trigger stop screw), small grub screws, and AOC adjustment lock down screw.
1/16" for backplate screws and stock regulator grub screw.
3/32" for circuit board mounting screw.
5/64" for inline reg adjustment, larger grub screws, and on some models, the trigger stop screw.
1/8" for grip screws.
5/32" for grip frame mounting screws and ram end cap screw (on the non-snap ring versions).
5/16" for the asa screw.
If I missed any, feel free to add them.
Last edited by warpedmephisto : 05-04-2003 at 09:50 PM.
|
