[jim4130]

I played with my RX sunday at the canobie big game and it shot great no problems all day. I didnt touch it all week after puting it away sunday and I pulled it out to play last night, I whent out on the feild to chrono it shot fine 1 balling but as soon as I started walking the trigger it got "stuck" in a bounce frenzy, I literaly took my hand off the grip frame and it was rippin 17.4 acourding to the OLED and didnt stop until I put my hand back on the frame and pulled the trigger. I tried adjusting the mech debounce and debounce all the way up and the cycle filter I put from 10% to 50% none of which made a difference. then I tried a factory reset on the board that didnt work either so now Im stumped

[sumorai]

Did any paint get in it? Maybe making the trigger stick.

As for the debounce, I generally run my mech debounce around 5 and debounce around 10.

I'll be at Boston Paintball tonight if you want to swing by and have me look at it.

[jim4130]

Ill pull the trugger out and give it a look and let you know what I find and if i cant figure it out Ill swing down so you can give it a look

[curly2k3]

change out the battery, and make sure the trigger return spring didn't ride up and become useless, thats what happened to mine at MAO

[jim4130]

battery was fresh, but I just pulled the trigger and the spring was ridding up, I just put 4 pods of reball though it no problem at least not with the RX any way off to the air system forums for me

[curly2k3]

good to hear about the rx.

don't feel bad, i've blown 3 tanks within a month now.

[jim4130]

mines a brand new used one time ninja tank, when I was just shooting the RX the tank reg, ASA and gladiator were getting Ice cold and moist on the outside and under high rates of fire the ninja reg was leaking from between the reg body and bonnett and my RX got 3-4 pods on a 4000 fill and it was down to 100 psi

[sumorai]

definitely not right.

[jim4130]

even worse I just pulled out my other ninja tank put it on the RX and again it was bouncing like crazy, then I noticed the ram cap was loose so I degased the gun, the allen screw part of the ram cap was loose aswell as the cap that you unscrew to pull out the ram sleeve. so pulled the sleeve again and regreased it and put it all back together aired it up and it shot fine again so I put a few more pods of reball through it and noticed as I was shooting the ram cap was slowly loosening and my other ninja reg was doing the exact same thing as the last one getting cold and leaking and this one just stoped holding air all together. and I used this tank last night on my droid and that thing shot great all night so now Im realy confused. so what time are you gonna be at BP tonight Gabe Ill let you have a look

[sumorai]

I'll be down there in an hour or so.

[poopresearch]

Jim, I have bad news.... you have cancer hands.

[sumorai]

Jim, the activator screw was in too far and the stock spring was replaced with a lighter spring. I adjusted the activator and swapped in my trigger spring, reset the debounce to 10 and mech debounce to 2 and ripped on it and it only went up to 14bps or so, whereas before it'd bounce up to 20bps or so. Send me a PM or something. I lost your #.