[ChevysAny1?]

well i run my phantom with a 13/3000 hpa tank with it. it also has a stock wgp reg on it. my problem is that that I can't get the velocity any higher than 260. Anybody have any suggestions that can help my problem. People told me to get rid of the reg all together but if I can work around it then that would be better thanks for the help.





i was also looking into a cp air thru grip...do you think that may solve my problems?

[EvilAuthorityX]

take the internals out of the reg= free air thru

or

get an adjustable reg

or

run a macro from the bottom line asa to the valve and just have the reg there as a grip

[tiny_the_tokin_bear]

What main spring are you using?

[Leafy]

ditch the reg or buy a reg that will adjust the pressure up to 800+ psi.

[ChevysAny1?]

this regulator came with the gun and I have the stock main spring in the gun.


so just take off the reg and get a simple air-thru grip...these should work right???cause i dont want to have to buy something else if its not gonna solve my problem.

http://www.directpaintball.com/PMI-R...2167C1403.aspx

or

http://www.pntball.com/items/item.as...LAID=412602389


EvilAuthorityX- how would i take out the internals in the reg cause i dont see anywhere that i can actually disassemble it. o and btw do you know Eugene Kim and Stanford Shih?? If you do I got the phantom from Eugene and Stanford is in my chem class at cal poly. just thought it was cool that I got a gun from a nugget.

[HEFF2.0]

I run a similar setup with a hyper 2 reg in the same place and the main spring is crucial. Make sure you have the correct spring in the gun. As well an adjustable regulator is a must in this kind of setup.

[ChevysAny1?]

wut kind of spring should i be looking at getting???? from what ive seen before in different threads it was either the red spring or the blue but Im not sure

[Leafy]

one of these would work better than a gas through and be cheaper http://corporate.marketplaceadvisor....0&i=67 557226 just take out the remote nipple and put in your own macro fitting.

[tiny_the_tokin_bear]

red main spring I believe, someone correct me if I'm wrong?

[ChevysAny1?]

leafy-ive looked at that option a few times but ive been playing with that reg as a "grip" you can say..thats why i was hoping i can have something similar to that..would istill run into problems by getting a gas-thru??

[Leafy]

you shouldnt run into this problem with a gas through unless its an expansion chamber. of course real men hold the pump handle.

[SeuDog]

Many people don't realize that that stock WGP reg is adjustable and is perfect for co2 or compressed air.

[Leafy]

Originally Posted by SeuDog

Many people don't realize that that stock WGP reg is adjustable and is perfect for co2 or compressed air.

yeah but you have to take it apart to adjust it. which makes it really sucky on cockers cause it would suck to sweet spot.

[EvilAuthorityX]

Originally Posted by ChevysAny1?

this regulator came with the gun and I have the stock main spring in the gun.


so just take off the reg and get a simple air-thru grip...these should work right???cause i dont want to have to buy something else if its not gonna solve my problem.

http://www.directpaintball.com/PMI-R...2167C1403.aspx

or

http://www.pntball.com/items/item.as...LAID=412602389


EvilAuthorityX- how would i take out the internals in the reg cause i dont see anywhere that i can actually disassemble it. o and btw do you know Eugene Kim and Stanford Shih?? If you do I got the phantom from Eugene and Stanford is in my chem class at cal poly. just thought it was cool that I got a gun from a nugget.

it was probably eugenes rec ball setup, 260 fps isnt that bad if you're gonna play at HSP

[ChevysAny1?]

ok guys thanks for all your help....if anything else persists ill know where to go thanks

[valkrie hunter]

tyler would prob never know me.... i suck too much