[millhouse58]

hey nation... heres the scoop. my friend has a vice and he wants to sell it to pay for an ego10. he said that the efficiancy is very bad... jumping from 250-300 and all over the place. he bought some board from tadao, wich was supposed to help i guess, but didnt... i know nothing about the vice or what problems they come with... can anyone tell me how to fix that problem and if its worth me spending money on? thanx.

[gamer565]

Reset the regs, lube everything, change the battery, set all settings/pressures to stock.

[BrainEmindless]

My vice is super efficient and very consistant. I have a Tadao Yakusa OLED board, but that honestly was more a coolness factor than anything else. It is much easier to program though.

edit: ooops yea Gamer is right, although I'd change the battery first, Then regs, lube, and settings!

[millhouse58]

thanx guys, we'll try that

[djotrebor]

clean it and lube it and reset the setting to stock. mine is also super efficient. depending on the paint - i usually get + or - 1 to 5

[pbjunky126]

set you lpr and check your paint to barrel match

[jtguy2269]

use a pressure tester as well

[eyeownyu]

a new board will not help with consistency or efficiency

[Nizmoh]

I had this problem a while ago . My Stock dwell on the ryujin board was 6 . A couple people suggested to turn up the dwell to 8 and everything went back to normal.

[xTheirOut2GetUx]

poor consistency is normaly one of two things, your guns either not getting enough air and because it's not getting enough to breathe it doesn't perform as well. People tend to try and set their pressure as low as possible to get better effecieny but your regs/dwell being too low can cause issues.

It could possibly just be dirty. Clean the regs and lube them along with just about everything else.