I can't get my BKO to fire!
I adjusted the pressure all over the place on the hpr and lpr. The dumb thing just will not fire!
Any help is greatly appreciated! Thanks
__________________
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Put this in your sig if your under 18 and you buy your own Paintball stuff Room Sale
__________________
"Originally posted by The Shocker Rocker: just the reg. but a reg doesnt make a gun different. its like putting a hyper 2 on a ego and cally it a Em6"
"Originally posted by 1stGenRex: yeah but at least they are smarter than the hot girls....Hot girls dont need to have a brain, they have a vagina"
tried the rechargeable one from my imagine, it was freshly charged
__________________
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Put this in your sig if your under 18 and you buy your own Paintball stuff Room Sale
Ok well there are some basic symptoms that we need to look at. The first is the electronics.
1. If your marker is not air'd up and you depress the trigger do you hear the solenoid click?
--If no then you need to change your battery.
--If battery is good then you need to check your harness connections and swap out a fresh board.
--if not the board or harness then you need a new noid.
A fast check on this is the hot wire the battery to the noid to try and make it click. This will tell you if the problem is in the board/harness and not the noid.
2. If the noid clicks when the marker is not air'd then it means that either there is no air getting to the noid or the ram is faulty.
--so double check your LPR by cranking it up until you hear the leak and then backing it off a few to verify you have air flow.
--then do a general check of your ram.
These are pretty basic markers and I'm almost 100% sure that its an electronic problem but if not then you have a clog some where. Not unheard of, but rare.
well im pretty sure its not electrical because i put the marker arms length away and pulled the trigger and herd the noid click
what do you mean by a check of my ram? I'm totally new to these kind of markers so i don't know much
__________________
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Put this in your sig if your under 18 and you buy your own Paintball stuff Room Sale
__________________
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Put this in your sig if your under 18 and you buy your own Paintball stuff Room Sale
So I tried replacing the regulator (needed a new one anyways) and its still won't fire. I just hear a click from the noid like I was dry firing it, my next instinct is to take the tray off and check the air passage ways. could that be the problem?
__________________
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Put this in your sig if your under 18 and you buy your own Paintball stuff Room Sale
Ok I'm going thought this in my head and here are some ideas.
1. go get a 100% new battery.
2. Turn up your LPR until the noid begins to leak. I'm going to take a guess here but I bet your LPR isn't letting any air into your ram because it's been rebuilt improperly. If you can't get the noid to leak by turning it up take your va off your gun and disconnect the air hose. Put it back on and turn the LPR all the way down. Now gas up the marker and slowly turn up the LPR to see if any air starts coming out.
If the LPR turns out to be the issues get a new VA that allows you to attach a "cocker" style LPR. I think you can still find them on Ebay or maybe Amazon.
__________________
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Put this in your sig if your under 18 and you buy your own Paintball stuff Room Sale
__________________
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Put this in your sig if your under 18 and you buy your own Paintball stuff Room Sale
if your noid is clicking, there's a vrey good chance that it's a low pressure air issue. I'm thinking that these folks are right about the LPR being put together wrong, or being faulty in some way.
Is the noid bleeding off if you increase the LPR pressure?
if your noid is clicking, there's a vrey good chance that it's a low pressure air issue. I'm thinking that these folks are right about the LPR being put together wrong, or being faulty in some way.
Is the noid bleeding off if you increase the LPR pressure?
Yes it is, I was gonna buy a new noid any way though because the wire on my current one broke...
Quote:
Originally Posted by Madpooh
Pilot or coil is probably bad on the solenoid. Happens a bunch to humphrey noids.
Ya thought something was bad in the noid
__________________
98% percent of ballers wipe, if your part of the 2% that has some sense of honor add this to your sig
Put this in your sig if your under 18 and you buy your own Paintball stuff Room Sale
