[jpsalahub]

I just installed the newest virtue board in my G7, and it bounces like crazy whenever I walk the trigger. Is the bounce the highest at 1 or 30? I had it at the default of 5 when it was doing this. I also lengthened my trigger, didn't seem to help.

[Uziel Gal]

The higher the value of the setting, the less sensitive the trigger becomes.

Trigger length can have an effect on trigger bounce - but return strength and the firing point within the pull may also need to be adjusted.

[jpsalahub]

so higher #= less bounce?

[Uziel Gal]

That's right.

[Kazer]

Mine is set to 13 on my G7. Buddy of mine has his at 8, but his firing point and pull length are quite a bit different than mine. I would start around 10 and go up or down from there.