[jay3303]

How do these upgrades look for my 04 prostock autococker? Feel free to give me advice on what else I should get or what I should not get, I'm new to the cocker scene.

CP ASA on/off
CP regulator
CP flame drop forward
CCM pump kit (already ordered it)
freakz barrell kit
shocktech supafly bolt
single trigger conversion kit
lighter backblock (need suggestions)
threaded feedneck installed maybe...or I probably won't need it at all once I convert it to pump so that'll probably not be necessary

and yea from here on idk what else I could add to my gun. It's pretty much stock still the only thing I put on it is a macro line and an ASA but idk what company it was from, just a cheap 15 dollar thing but it works

[tacxplosion]

If it's a slider frame you're getting, then get a roller sear to smoothen out the trigger pull. The bolt upgrade is not really needed if you're going to pump it, stock works just as well; unless you're going for super-smooth pump stroke, then no o'rings works better. If you just want a light backblock, get an A+ or a CCM delrin backblock, though stock looks better IMO and works just as well in a pump (unless you're going for the "I can pump it with nothing but my index finger" pump stroke, in which case a spring kit is also mandatory). I guess what I'm trying to say is:

Good pump:
Smooth pump kit
Barrel kit
Any decent regulator
Slider frame
Roller sear

"I can pump it with nothing but my index finger" pump (mech):
Smooth pump kit
Barrel kit
Any decent regulator
Slider frame with polished trigger plate
Roller sear
O'ringless delrin bolt, grooved for detent
Aluminum pump arm (if you can find one that fits a pump, or have it made)
Delrin backblock (or midblock modification, it'd take the most mass out of the pump stroke, would require an o'ringless midblock setup)
Spring kit


"I can pump it with nothing but my index finger" pump (electro):
Smooth pump kit
Barrel kit
Any decent regulator
Eclipse, t-board or tadao board in any compatible frame or universal T-board (single solenoid with e-blade capacitor) in any frame (modified to fit a 'cocker)
MQ2 valve (takes the springs out of the equation, no more fighting the mainspring to cock)
O'ringless delrin bolt, grooved for detent
Aluminum pump arm (if you can find one that fits a pump, or have it made)
Delrin backblock (or midblock modification, it'd take the most mass out of the pump stroke, would require an o'ringless midblock setup)

[jay3303]

Nice thanks man, I didn't even know I could make it a pump and electro. Bit I think that'd be a little too much lol I like the being able to pull with nothing but my index finger mech one though I'll probably look into getting the things you mentioned on that one