Need help with Rx????

EddieR69 · #1 10-19-2009, 08:20 PM

My Rx is way to loud, Ive put about 10 cases through it but seems to be louder than a Ego, any suggestions? Also what is the Best settings for Lpr, and Hpr? Were could I send my gun for repairs or Warranty?

Albert 93 · #2 10-19-2009, 08:55 PM

Check the regulator pressure. Mine was at like 300psi then after turning it down to like 200psi it was quieter.

anthonybsd · #3 10-19-2009, 09:13 PM

Quote:

Originally Posted by EddieR69

Also what is the Best settings for Lpr, and Hpr? Were could I send my gun for repairs or Warranty?

I used Eda's method for tuning my RX for consistency, HPR at 180PSI, and LPR until proper velocity is reached (was about 3/4 turn past flush for me). Since I've yet to find an LPR tester for it I have no idea what it's at on mine, but I'm guessing around 50-60PSI.

Call MacDev USA for warranty and repairs.

PaoloNY · #4 10-19-2009, 10:49 PM

If you dont have a way to test hpr, just zero hpr, bring hpr flush and then slowly raise hpr until desired velocity is achieved. While in tech training this was one of the biggest problems I saw, many unbalanced reg's. But its a real easy fix.

poopresearch · #5 10-19-2009, 11:17 PM

^^^

This is similar to the method I use but I start with the LPR out 1/2 turn. Slowly increase HPR to reach velocity. If increasing HPR stops increasing velocity, increase LPR by 1/4 turn and continue increasing HPR.

With stock bolt my LPR generally ends up flush to 1/2 turn in and with the gold bolt flush to 1/2 turn out. Works great.

curly2k3 · #6 10-19-2009, 11:25 PM

if you don't want to mess with it and you want it check out, you could send it to MacDev USA in Miami or myself (Minnesota) as well. Bourke should have my info up on the site here soon.

EddieR69 · #7 10-20-2009, 11:29 AM

Curley pm your info please

curly2k3 · #8 10-20-2009, 11:54 AM

will do brother

EddieR69 · #9 10-20-2009, 12:09 PM

Thank you

curly2k3 · #10 10-20-2009, 12:15 PM

not a problem, thats why I am here now

kjata090 · #11 10-20-2009, 02:00 PM

his bolt pin could be too long, do the edda fix and take a hammer and tap it in

anthonybsd · #12 10-20-2009, 02:50 PM

Quote:

Originally Posted by kjata090

do the edda fix

That guy is a freaking MacGyver of the Macdev community.

curly2k3 · #13 10-20-2009, 02:59 PM

if he sends it to me, I am more than aware of any and all issues that it could be.

eddahenry · #14 10-20-2009, 04:38 PM

Quote:

Originally Posted by anthonybsd

That guy is a freaking MacGyver of the Macdev community.

LOL Nah
Im just Lucky to be able to be the first to get new guns and i try and help out buy doing nasty things to them to see what happens.
so i uselly find and little problems early and sort out a fix