[iPaintYou]

So, I was paintballing today and everything was fine (Well my VloJr crapped out on me but, that's a different story). My pressure on my stock VS2 was right around 230-240. About an hour later I look at my gague and it sais it was 380! I didn't make any adjustments. So, is this just a result of the VS2's ****ty reg/asa combo or am I doing something wrong?

[OneUp]

may be the vs2 reg, may be the tank reg.

lube the vs2 reg first. put a few drops of paintball gun lube down the asa and dry fire, see if that problem goes away.

meanwhile try the tank on another gun that has both a reg and a gauge and see if that gun also creeps.

if it's a tank with a myth reg, i bet it's the tank. One of those things blew up a droid

[iPaintYou]

I don't think it's the tank reg but it might be. I never thought of that. I'll lube the ASA and see if that works.

[cougar20th]

You didnt state if you were using co2 or hpa. if its co2 than there is the possibility that liquid co2 got past the reg & expanded in the gun. This would give you a spike. If it continued it would create a high reading. If your using hpa could be a adjustment slipped some or the reg finally became broken in.

[iPaintYou]

Hpa

[‹GOD›]

Any chance you're running a GA myth?

[ferret15]

ignore the problems i'm buying this bad boy XP

and i have a VS2 oring kit XP