I'm starting to think I have a bad noid. I have checked battery. Reg, Orings. I have cleaned noid. It will shoot every time If I wait 10 seconds between shots. That tells me something is taking time to get ready for the next shot. Recently I took out the port inserts and turned on the air to flush out debris. That did not help. I recently put on a different reg. No change. I tried pressure up to 230 no change. So if I wait 10 seconds a good shot. If I go for a second shot right away PUT PUT PUT.
Board is set dwell to max
anti bolt stick mid way
ROF mid way
well if the gun cycles fully it's safe to say it' not your noid. that being said it's got to be an electrical issue. first thing I suggest is a new "name brand" battery. try that and report back
Could be an air supply issue. Your marker may not be re-cvharging between shots.
Try servicing your inline reg.
If you aren't screwing your air system all the way in to your ASA, try that - could be that your air system valve isn't opening fully.
The opposite can also be true - with some combinations of ASA and air system, screwing the air system in too far can lead to the ASA degassing pin blocking the outlet from the air system, so if your tank is already screwed all the way in to the ASA, try unscrewing it half a turn and see if that makes any difference.
