So I'm setting up my just recieved 05 ego back up to play with this weekend till I get my dm back, or hell i may make the ego my main machine if it behaves itself. Anyway I'm going to go play with some guys that play psp and practice as such so I am learning the settings (only played with egos a few times never done anything but hit the on button). I read the stickies and set it up the best i could from what I read, and read most of the manaul, but I have a little question I need answered. This confused me, and before you flame me I'm dyslexic so try not to be an ******* I realize my short comings when it comes to reading directions but I think I did about the best I could.
Quote:
Originally Posted by Uziel Gal
Go in to setup mode by pressing the red button on the board.
Go to presets and select Ramp.
This will give access to the RMP SET menu.
In the ramp setup menu, check that the following settings are in place: -
ON PULL = 4
KICK IN = 5
SUSTAIN = 5
RESTART = 1.0
Got to ROF CAP and adjust to ON.
This will give access to the ROF CAP and OFF ROF settings.
Set the values of these two settings as directed in post #1 of this thread.
|
Now the gun is in rmp 1 (ramp 1) and I set the OFF ROF to 10, and the ROF CAP to 10. This quote has me a little confused tho, like i said it may be that I just suck at reading directions and am doing my dyslexic best. I can't find the ramp setup menu or does he mean that this is the setting for ramp 1 and I did everything I need to do? Also the bottom like 1/8 of the lcd screen the pixels are out so I can't see like the last letter when I am setting stuff up.
Less important but I'm also curious about which bot i have, I looked in the sticked bolt list and mine doesn't match any of the pictures exactly. This isn't real important but if someone could tell me it would be nice.
This is my bolt
and these are the two bolts that closest match it in the sticky
05 bolt
06 bolt
Now it's shaped like and 05 bolt pretty much, but it doesn't have the O-rings which makes it look more like an 06 bolt. So is it just like a later model 05 bolt? It's like a bybrid between the two, and I was expecting a bolt with O-rings so this is fine with me I've broke down and lubed so many matrix bolts I could do it blind folded.
