[bballe336]

its a great board the mag mod is far too heavy. a firneds angel lcd was done up by tag. that trigger would just stick on the switch when u started walking becuase he magnets were so damn strong.

[SlingerXL]

Yeah, but they give you nonmagnetic set screws too so you don't have to use it if you don't want to.

[strangeir3]

Great to hear.

WOW, i cant wait till i get my gun back. It will finally rip without any chops, or gay sensi skipping.

[Tricky]

My Predator'd LCD still chops a little. Most of the paint in this area has been having a lot of problems lately. I'm assuming it's because of the weather changing. I really like the way the magno trigger mod feels.

[DanDaPimp88]

trigger would just stick on the switch when u started walking becuase he magnets were so damn strong.

how would it stick? The magnets are put on so the polaritys push off each other not connect when they touch each other? So how does ur friends sticK?

Oh and do they take the vernair or w/e wheels out of the gun so u cant adjust the trigger with those anymore?

[DanDaPimp88]

pred 2 > MT

ive used the Fly board in my gun for a while but when i got the pred 2, man oh man is it way better such a more smoother trigger pull because theres no more stupid opto trigger and it shoots way way faster you also lose some weight off ur gun cause they take the battery out and also pred2 has better eyes. Oh and its not done by some guys in a basement like dr.strange is making it sound its done by certified techs that are just as good if not better than angel techs. Also read this from the TAG website.GO WITH PRED2 YOU WONT BE DISSAPOINTED



Monolithic design - Ultra-high quality components used, Professionally assembled in an automated facility, and individually tested to the highest standards in a fully ESD-protected Mil-Spec environment.

Trigger sampled asynchronously - The predator does not "sample" the trigger as other boards do. The instant the trigger is depressed, it leaps into action at the speed of light in less than 200 nanoseconds. If you fired a laser down the field at the same time the trigger was pulled, the predator would begin firing your gun BEFORE the light made it to the player you were about to shoot, nothing is faster.

Power - The predator has a resistance of just .031 ohms. That is less than the copper wire used in any gun.

Current carrying capacity - The Predator can source up to 30 volts at a whopping 37 amps (that's over 1000 watts of power), combined with the near-zero on resistance. Its no wonder the predator can slam a solenoid open faster than any other board. If the wires were thick enough, the predator could start your bling bling sized urban assault vehicle.

Size - fits anywhere, smallest part count of any comparable board but packed with more features, lightest board around.

Upgradeable - as small as it is, it can be reprogrammed at the factory with any new features.

Computer interface - will interface with a PC for fine-tuning of programming (existing board support it, interface cable/software coming soon)

Fire Timings - The Predator II has 18 different internal fire timings for a given rate of fire, which it selects based on 9 separate triggers. These are auto-selected on ashot-by-shot basis to make sure the next shot comes out as fast as possible and un-chopped.

Design and Engineering By KM2 - These are the guys that installed eyes in the Angel over 5 years ago and their technology is still being used in almost all of the super-guns on the market.

.................................................. ...................
Let's Talk Warranty on our Angel installs
.................................................. ...................
We have the best in the industry for an aftermarket install. As a matter of fact we have the best aftermarket warranty period. Many state that their install "will not void your warranty". How does this help if you only have 1 month left on your factory warranty, purchased the gun used or bought it new 4 years ago? It does not help at all. When we install our mod we give you a NEW factory warranty on your entire gun ! We do not care how old the gun is or who owned it before you. We handle the warranty just as the factory would. No bull****, no crap, no excuses.
.................................................. ....................
Feature List:
.................................................. ....................
New board with Anti Chop eyes installed (break beam) 3mm or 5mm.
9 volt battery operation.
Accessory Port for driving a hopper.
MROF is unlimited.
TAG factory support with Free software upgrades for as long as you own the gun.
We drill out the internal AIR passage on the IR3, SPEED and A4 to increase the air flow and lower the required LPR pressure to the Solenoid. Your diverter plate area is plugged then sealed with a space-age acrylic to eliminate any chance of air leaks.
Cops/Sensi holes plugged (IR3, SPEED and A4)
Multiple firing modes (semi, full auto, auto response, 2 shot and 3 shot burst - Predator II only)
.................................................. ....................

[SlingerXL]

I've owned Stock A4's, Fly's and now a Pred speed and there isn't a comparison. Pred II speed is farrrrr faster and has much better features. The only thing I miss is the timer but I just wear a wristwatch.

[smasher41]

here's some pics of how i mounted some pred 2's, I opt not to isntall in the battery tube cause i can acess the tourney lock dip switches easier.
SPEED


LCD


sorry for the crap pics

[stl.a4]

does anyone have any thoughts on the morlock board?

[Mike O'Conner (Banned)]

Well I made a thread saying I did this now its time for the good proof- VIDEO!

For a quick summary I put an AdvantagePB Timmy board into my HK Speed. For people who already have HK/WAS-ACE tech in their gun its like a 5sec install. You can get it here: http://www.advantagepb.com/Products/v1timmy.html


VIDEO!:
Right Click, Save Target As

[HKagg (Banned)]

nice

[BANNED GANGSTA]

illegal = gay !

[LiteEmUpGood]

Really gay

[K-OS]

can u take ramping off? then its koo..i understand sometimes u just wanna rip hella fast for fun..but if u cant turn it off..UHHMM. no i hate playing with timmys + dm4's at my field that ramp...i see 12 year olds shoting 19bps sometimes.. and trust me..there not fast shooters.

[wdp_angel04]

Hey guys.......I can't decide on MT conversion, WAS/ACE, HK, or pred II for my a4........any help in comparison would be nice.

[speedboy42]

Where can i get the chaos ace done for my speed and how much is it?

[paintball545]

just get it drilled, then put the chaos and chaos eyes in yourself.

[speedboy42]

ehhhhh im not to fond of my skills but i know theres a site to get it done i jus wanted to know the site

[kray9]

you can get it fly'd for $400

[speedboy42]

im not into spending that much money thats why i dont want to get the predator mod either

[DaveEllis]

http://www.warpedairsmithing.com/

does it for 200