Ok, so I finally decided to post my almost completed Spyder Imagine on here. It started as a completely stock Spyder Imagine. This was just a side project for when I got bored, If I have time I will go into more depth about the modifications done to it but for now I'm going to keep it simple.
To start it is a 2000 era Spyder Imagine and mods are as follows:
Custom milled upper
Custom drilled and tapped receiver to slide trgger frame forward
Custom modified hammer to function with trigger frame in the forward position
Drilled and tapped grip to accept a standard on/off or asa
15* front block
32* pressure gauge
Freak barrel with 12" front
Metal feed neck (forgot brand)
Torpedo velocity adjuster
Custom snatch grip (bottle opener dremeled)
Dye sticky grips
32* venturi bolt
32* Spring kit
Aftermarket trigger (forgot brand)
Low pressure valve kit (I think, I can't remember for sure but I'm buying another valve soon anyways.)
The gun fires flawlessly and has a much better feel since the position of the grip frame has been moved forward about an inch. It operates at around 400 psi but I need to do some tweaking with different springs. It is a very smooth shooter for a spyder.
A few older pictures before it was finished.