Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

ReplyNews Ups
 
Thread Tools
Old 08-12-2013, 10:25 AM #64
Nate @ Ninja PB
Ninja Paintball
 
Nate @ Ninja PB's Avatar
 
Join Date: Nov 2011
Location: Illinois
Nate @ Ninja PB works for a Paintball manufacturer
Nate @ Ninja PB owns a Planet Eclipse Geo
Quote:
Originally Posted by sachinabe View Post
Hi,

I just bought a NInja SHP without realizing what it meant. I have an azodin zenith marker and now a bit concerned. Ive removed the shims to bring down the pressure to 950 psi. Can I still use it with zenith. Is there anyway I can bring the pressure on the SHP down to 800 psi?

rgrds
sachin
Unfortunately the SHP regulator can only go down to 940 PSI and not any lower. We build that regulator specifically for the higher pressures used for response triggers on Automags and Tippmanns. If your marker can still use that or not I am not sure, you would have to contact Azodin to find out on that. We only recommend the SHP be used with the Automag RT's and Tippmann RT's.

Quote:
No. 950 is the lowest. I'm sure rob will work with you on this. He's a good guy
Rob is no longer with Ninja, he has moved onto a different Job.
__________________
Ninja Paintball
Made in the USA
www.Ninjapaintball.com
www.facebook.com/ninjapaintball
Nate @ Ninja PB is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 08-12-2013, 10:36 AM #65
Mr. Stealthy
 
 
Mr. Stealthy's Avatar
 
Join Date: Nov 2004
Location: Corpus Christi, TX
 has been a member for 10 years
Mr. Stealthy owns a Planet Eclipse Lv1
I couldn't help but notice how many Mag owners have super long hair.

Looks like this is another great ninja product.
Mr. Stealthy is offline   Reply With Quote
Old 08-12-2013, 02:03 PM #66
dominantgazelle
Cal Poly San Luis Obispo
 
dominantgazelle's Avatar
 
Join Date: Nov 2010
Location: Foothill Ranch
dominantgazelle plays in the APPA D4 division
dominantgazelle is one of the top 250 posters on PbNation
dominantgazelle supports DLX Technology
What are the benefits of using 1100 psi over 650 on a top man?
dominantgazelle is offline   Reply With Quote
Old 08-11-2014, 05:53 PM #67
Thomarann
 
 
Thomarann's Avatar
 
Join Date: Jul 2014
Location: Alberta, Canada
Annual Supporting Member
Quote:
Originally Posted by Rob @ Ninja PB View Post
This is a nice review Social Paintball did when we first released it.

Dragging up an old thread but found it searching.

This video is misleading as he repeatedly refers to the belleville springs in the reg as "shims" which is wrong. You can clearly see the 3 silver shims remain the the bonnet cover he removes and sets down.

In addition, earlier in the thread Ninja suggests this is a great reg. for Tippy's with RT and/or Cyclone feed. Later in the thread, it is suggested it is for Tippy's only with RT.....which is it?

Marc
Thomarann is offline   Reply With Quote
Old 08-11-2014, 07:16 PM #68
going_home
Hebrews 13:8
 
going_home's Avatar
 
Join Date: Sep 2005
Location: Florida
Annual Supporting Member
going_home owns a Planet Eclipse Lv1
Wink

Automags.

Super high pressure is for Automags.

going_home is offline   Reply With Quote
Old 08-11-2014, 08:08 PM #69
jonotwist
fistfull o'sunshine & joy
 
jonotwist's Avatar
 
Join Date: Sep 2006
Location: NE ohio
Annual Supporting Member
jonotwist plays in the APPA D5 division
jonotwist is one of the top 500 posters on PbNation
jonotwist supports Empire
Quote:
Originally Posted by Thomarann View Post
Dragging up an old thread but found it searching.

This video is misleading as he repeatedly refers to the belleville springs in the reg as "shims" which is wrong. You can clearly see the 3 silver shims remain the the bonnet cover he removes and sets down.

In addition, earlier in the thread Ninja suggests this is a great reg. for Tippy's with RT and/or Cyclone feed. Later in the thread, it is suggested it is for Tippy's only with RT.....which is it?

Marc
when it comes to tippmans its fine for either, that pressure helps when it comes to cycling those pistons.

so which is it? both.
__________________
Speak, if you're worth the listening
vintage old feedback High Tech Shiny Feedback

Breakout Actions Sports Wenies Buy Elsewhere
jonotwist is offline   Reply With Quote
Old 08-12-2014, 11:31 PM #70
Thomarann
 
 
Thomarann's Avatar
 
Join Date: Jul 2014
Location: Alberta, Canada
Annual Supporting Member
Quote:
Originally Posted by jonotwist View Post
when it comes to tippmans its fine for either, that pressure helps when it comes to cycling those pistons.

so which is it? both.
Great - final question: can i use it on my LV1 too?

Thanks
Thomarann is offline   Reply With Quote
Old 08-12-2014, 11:41 PM #71
Pvlacrosse14
 
 
Pvlacrosse14's Avatar
 
Join Date: Jun 2013
Location: New Jersey
Pvlacrosse14 is playing at Living Legends VII
Pvlacrosse14 owns a Planet Eclipse Geo
Pvlacrosse14 has achieved Level 3 in PbNation Pursuit
Pvlacrosse14 is attending Decay of Nations VII
Pvlacrosse14 supports DLX Technology
Quote:
Originally Posted by Thomarann View Post
Great - final question: can i use it on my LV1 too?

Thanks
NO. Do NOT put anything more than say 550-600 on your lv1
__________________
"DM6pb64: Dont you know that 80% of pb players are overweighted basement neckbeard dwellers"



OLED Bob Long G6R
Spire 260
Ninja 68/4500 Grey Ghost
Empire Events
NXE Elevation
Pvlacrosse14 is offline   Reply With Quote
Old 08-12-2014, 11:45 PM #72
OR Baller, CST
LUXE
 
OR Baller, CST's Avatar
 
Join Date: Aug 2011
Location: Corona, CA
OR Baller, CST plays in the PSP
OR Baller, CST owns a Planet Eclipse Geo
OR Baller, CST plays in the APPA D3 division
OR Baller, CST supports DLX Technology
Quote:
Originally Posted by Pvlacrosse14 View Post
NO. Do NOT put anything more than say 550-600 on your lv1
Lies, you can shoot standard psi which is around 800 I believe.
__________________
HaVoK
OR Baller, CST is offline   Reply With Quote
Old 08-13-2014, 11:43 AM #73
Thomarann
 
 
Thomarann's Avatar
 
Join Date: Jul 2014
Location: Alberta, Canada
Annual Supporting Member
Ok, that makes sense. I just called Ninja tech support and "Matt" told me to just remove one of the three shims to drop the pressure to 950. Now I do t know what to do as this conflicts with the instructions with the reg. Marc

Last edited by Thomarann : 08-13-2014 at 11:50 AM.
Thomarann is offline   Reply With Quote
Old 08-13-2014, 11:45 AM #74
Pvlacrosse14
 
 
Pvlacrosse14's Avatar
 
Join Date: Jun 2013
Location: New Jersey
Pvlacrosse14 is playing at Living Legends VII
Pvlacrosse14 owns a Planet Eclipse Geo
Pvlacrosse14 has achieved Level 3 in PbNation Pursuit
Pvlacrosse14 is attending Decay of Nations VII
Pvlacrosse14 supports DLX Technology
Quote:
Originally Posted by OR Baller, CST View Post
Lies, you can shoot standard psi which is around 800 I believe.
Well ya I guess I worded it weird. I meant to say it is not needed and has zero benefit
__________________
"DM6pb64: Dont you know that 80% of pb players are overweighted basement neckbeard dwellers"



OLED Bob Long G6R
Spire 260
Ninja 68/4500 Grey Ghost
Empire Events
NXE Elevation
Pvlacrosse14 is offline   Reply With Quote
ReplyNews Ups


Paintball News Rules
  1. No Upping threads. If you have something to say, please do, but don't post in the thread just to take it to the top of the forum.
  2. Do not post "1st post", "1st", "First post" or anything similar (or with any other number) at any point in a thread, even if you post a comment too. It is really annoying and it will result in a ban.
  3. If you don't like something, say why instead of just calling it ugly, lame, gay or any other name. If it is old, simply post a link or report the post with a link to the older News thread.
  4. Please don't post links for places to buy items. That encourages stores, sponsored players and other people to do it and spam the site.
If you have questions, please post them in the Talk to Mods/Admins forum.

Thread Tools

Posting Rules
Forum Jump