Anyone had issues with the spire feeding the VIS engine on stock sensitivity settings? Haven't really noticed on 12.5 but went to uncapped semi and it really feels like it's skipping shots. Brand new energizers so I will save you that one :p
Just as iron sharpens iron, one man must sharpen the other. Proverbs 27:17
If the marker has nothing to shoot, but shoots anyway. Then the bolt/eye delay is to low and the eyes are seeing the bolt as a ball and thinks it ready to fire again with nothing in the breach(skipping shoots).
If the marker is shuttering, then yes it's likely the hopper. Adjust the hopper sensitivity to correct that.
Team mate had same issue... Spool in his Vic the Spire wouldn't feed it fast enough.... He called Virtue but no setting would feed that spool engine right ... He now uses a rotor ... I know it's sad but Bob made his spool really really good ...
__________________ IrishMafia deutscher Mob
DSK LUCKY 7
Badass Secondary Honorary, Super-Duper, Awesome, Superman Ain't Got **** On Them, (you get the point) Council:
1.phlemoe- BADASS With one Lung
2. Chuck Norris
Up the sensitivity of the Spire. It should pick up the VIS shot. Both spires still have issues with the Vcom engine at times, but I have a couple of Rotors too if I have issues. I normally use the VIS engine though, so it isn't an issue.