Multicam Clone GTi and Multicam Axe FST
First my rules:
All Normal Rules Apply
Please be respectful and act like an adult
Please no low ball offers, they will be seen as free ups.
Prices are OBO and include shipping to the lower 48
Shipping is Dependent on Feedback
Looking for Specific trades, unless HIGHLY in my favor
Today I have two markers that I never use, so I would like to see what else is out there. If you would like to see additional pictures of anything, please let me know. I'm in no hurry to sell or trade these beautiful markers, but feel free to make an offer.
First Up is a true factory Clone GTi that has been professionally Duracoated in a Multicam pattern. The trigger frame has been rounded and milled to eliminate the sharp edges of the stock trigger frame. The exterior is in very good shape with a few areas of minor wear pictured below. It features a matching barrel and complete Shift insert kit. It will also come with a set of fitted o-rings and a Pooty modified bolt to accept the included rhino spring for cold weather play. This is the smoothest GTi out of the 4 I have owned.
Exterior is in 8.5/10 condition and 10/10 mechanically.
Next up is a professionally Duracoated Empire Axe in a Multicam pattern. This Axe was done by the same company as the Clone GTi above. This Axe is stock with the exception of the matching Furious .689 barrel. The exterior does show wear and the wear is pictured below. I would describe it as a 7/10 condition but it is in perfect shape mechanically. It has not been used in just over a year, so it may need to be tuned for best performance.
If you have any questions or concerns, please let me know.