Hey guys, been battling with a leak from either the solenoid or the manifold. I've taken the gun apart, made sure the solenoid, gaskets, and manifold are clean and have no visual damage. After I button everything back down and air it up its fine, no leaks, but after a day or two I'll air it up and once again a slight leak will be coming from that area. I've done this multiple times and had the same results every time. Wondering if anyone else has encountered this issue, and what you did to permanently fix the issue?
I had the same thing happen with mine. I couldnt figure it out to save my life, I changed o-ring after o-ring and regreased everything. I sent it to a shop and it turned out to be the barb that connects the air line to your manifold. Ive heard its kindof a common issue with egos. Hope this helps!
I had the same problem, took the gun apart to change the rubber gaskets on the manifold. I noticed 1 of the 3 screws to the manifold was loose, I changed the gaskets and made sure to tighten the screws, everything is fine now. I saw someone else post that all they did was tighten the manifold screws and it worked.