I have my ripper 1 back up. Pics pretty much explain the upgrades. Has an infamous board inside. Will also include a black trigger, ram sleeve and 2k5 front block for the option to make it ninja. I haven't used this gun in 7-8 years. It's just been sitting in a box. The gun is sold as is. I'm sure it will need a good cleaning and to have the o-rings and hoses replaced. The board also will need to be programmed. The eyes work but they are off when you turn the gun on, I don't have the time to mess with it but I assume its just in the wrong mode. The underside of the body was not milled professionally. Looks like a dremel job. It never bothered me as you can't see it when the guns assembled but someone with a mill could clean it up in a few minutes. All the threads are good except one of the eye cover holes has the first couple threads stripped. I put in a longer screw and there are still plenty of good threads to hold it tight. The body and frame are in great condition but there are scratches on some of the parts. Eye cover, trigger guard, regs. Over all I would give it an 8 out of 10.
Looking for $800 obo but would rather do a partial trade. Any trade would need to include a minimum of $500. Interested in Angels, other Bob Longs, nice ICD guns, Cockers, feel free to offer anything. Post here or pm me.