Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

ReplyGold Ups
 
Thread Tools
Old 12-27-2013, 12:09 PM #1
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
Cocker parts, barrels, ASAs, HPRs, grips - lots of 'em

Shipping is NOT included in the price. I ship via USPS, so it will not be expensive. Buy more to save on shipping! Please keep orders at $10 or more to save me trips to the P.O.! I am really not interested in negotiating on price unless you are buying a lot of stuff.
Please use the Note section in paypal to remind me what you are paying for!
I will ship international.
Click on the pics for full size! If that doesn't work for you, use a better browser

-----------------------------------------------
New Cocker barrels

1. New 12” TASO Winforce - $12
2. New 14” TASO Winforce Stealth - $20
3. New 12” black CMI Thunder Pig Tru-Flight straight rifled - $9
SOLD 4. New 9” chrome CMI Thunder Pig Tru-Flight straight rifled - $12 SOLD
SOLD 5. New 12” chrome CMI Thunder Pig Tru-Flight straight rifled - $9 SOLD
SOLD 6. New 12” PI M3 – $18 SOLD
7. New 12” ANS 3d – $12

-----------------------------------------------
Used Cocker barrels 1

8. 12” Freak bored Bob Long barrel, has some tip wear - $38
SOLD 9. 12” 2-piece Dye Ultralite in great shape - $45 SOLD
10. 14” Smart Parts All America 2 piece (missing SP sticker) - $26
SOLD 11. 14" and 10” J&J Edge kit (.689 not included, you get .691 and .693 backs) - $24 SOLD
12. 14” SP Freak front - $18

-----------------------------------------------
Used Cocker barrels 2

SOLD 13. 16" Two-piece JT Boomstick w/ stainless back - $18 SOLD
SOLD 14. 14” 32 degrees carbon fiber - $18 SOLD
SOLD 15. 15" SLY Annex Mil-39 CF cocker barrel. Lots of wear on the outside, bore is good. $22 SOLD
16. 14” CP .689 - $18
SOLD 17. 10” CP – with some pitting .689 - $14 SOLD
18 14” Dye Excel – $14 ea (1 SOLD)
19. 14” CP .689 - $18
SOLD 20. cocker to cocker control bore .685 - $10 SOLD

-----------------------------------------------
3-ways

SOLD 21. Orracle in good shape - $12 SOLD
22. ST Bomb barrels (no rod), chrome has some pitting - $18 ea (chrome sold)
23. 2 ANS and 1 WGP 3-ways - $6 ea (Black ANS sold)
24. New TASO 3-ways (come in original packaging) - $10 ea (purple is sold)

-----------------------------------------------
Rams

SOLD 25. WGP MP44 in gloss black good condition - $40 SOLD
SOLD 26. ANS - $12 SOLD
SOLD 27. 2 chrome and 1 red rams - $12 ea all SOLD
28. 98 STO ram, good shape - $28
SOLD 29. Belsales ram w/ Eclipse QEVs in good shape - $68 SOLD
30. Eclipse ram with broken base. Body has some tool marks too. Use the body or internals for parts. - $15

-----------------------------------------------
LPRs – all untested unless otherwise noted

31. unknown skinny brass LPR – needs rebuilt - $22
SOLD 32. Palmer’s brass Rock (w/ a modern knob) – needs rebuilt - $38 SOLD
SOLD 33. Palmer's? In good shape - $26 SOLD
34. silver ST FGP in decent shape - $18
35. Trilogy - $8
36. chrome WGPs, Karni tickler has some pitting - $16 ea (both Ticklers sold)

-----------------------------------------------
Aftermarket Front blocks

37. Aftermarket blocks 2k in various conditions - $6 ea (1st red block on left and silver/black splash SOLD)
38. aftermarket pre-2k blocks in black and silver - $8 ea (silver one SOLD)

-----------------------------------------------
Stock blocks

39. Stock 2k+ blocks - $3 ea
40. 2k banjo bolts - $3 ea

-----------------------------------------------
Rods

41. WGP timing rod - $6 ea
SOLD 42. ANS timing rod - $9 SOLD
43. WGP? Cocking rod w/ tool marks - $7
44. Brass Palmer’s STOP trigger shoe – allows you to quickly adjust rear travel - $28
45. pump arms w/o collars - $5 ea
46. pump arms w/ collars - $7 ea

-----------------------------------------------
Internals

SOLD 47. pre-98 valve for running unregged air - $12 SOLD
SOLD 48. Belsales REX dialer and hammer with Tech valve - $40 SOLD
49. New WGP chrome bolt pin - $7
50. various bolt aftermarket pins (Eclipse, ST, Freeflow) $10 ea

-----------------------------------------------
2k bolts

51. Unknown chrome and delrin - $15
52. WGP STO, well used - $8
SOLD 53. Eclipse delrin Dart and pin - $28 SOLD
SOLD 54. Extremely rare and light Orange bolt - $45 SOLD

Last edited by apes4us : 03-11-2014 at 11:13 AM.
apes4us is online now   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 12-27-2013, 12:09 PM #2
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
-----------------------------------------------
Pre-2k bolts

55. low blow delrin - $18
56. various aftermarket venturi bolts - $8 ea

-----------------------------------------------
Beavertails

57. WGP and other BTs - $6 ea (top black sold)
58. Shocktech and Warped Sports Dark BTs - $14 ea (bottom three are sold)

-----------------------------------------------
VA, back block, etc.

59. new KAPP pre-2k VA - $12
60. Superstock VA - $10
SOLD 61. TASO ’99 back block - $10 SOLD
SOLD 62. New? ST gloss black clamping feedneck STO/Timmy threads - $24 SOLD
63. KAPP new green cocking rods - $10 ea

-----------------------------------------------
Pump kits

SOLD 64. Hooptie pre-2k pump kit, pre-tapped for hitman plate - $20 SOLD
SOLD 65. CCM 2k deluxe kit excellent condition- $48 SOLD

-----------------------------------------------
Trigger frames


SOLD 66. old WGP Sniper 1 frame (no sear installed), powdercoat flaking on one side - $28 SOLD
SOLD 67. Satin black pre-98 slider, has brass tipped screws - $35 SOLD
68. Gloss black Benchmark pre-98 slider, has brass tipped screws - $42

-----------------------------------------------
Sites

69. TASCO red dot site - $12
70 WGP shroud - $16
SOLD 71. WGP shroud - $16 SOLD

-----------------------------------------------
Regs – untested but I have no reason to believe they won’t work great

SOLD 72. Macdev reg has some wear, good shape - $44 SOLD
SOLD 73. Sidewinder regulator in great shape - $68 SOLD
SOLD 74. Macdev reg great shape - $44 SOLD
75. CP reg great shape - $44

-----------------------------------------------
Grips

SOLD 76. Smart Parts Wood grips in gold and black grain for single hole cocker and mag frames - $38 SOLD

-----------------------------------------------
More grips

77. WGP grips w/o sticker - $4 ea
78. WGP grips w sticker - $6 ea
79. Hogue grips - $10 ea (1 sold)
80. Hybrid grips for Eblades (and presumably Egos) - $5
81. Sticky 3’s - $20 ea
82. Sticky 2 - $10
83. Sticky 2’s yellowed clear - $6 ea
SOLD 84. PMI battle for sheridans - $14 SOLD
85. various grips - $4 ea

-----------------------------------------------
Gauges

86. slide checks and quick disconnect - $8 ea
87. micro gauges - $5 ea

-----------------------------------------------
Hoses

88. stainless braided hoses in various lengths (let me know how long you’d like it to be) - $3 ea
89. stainless 90* fittings - $2 ea
90. brass 90* fittings $2 ea
SOLD 91. macro fittings and some hose - $12 for all SOLD

Last edited by apes4us : 03-11-2014 at 11:14 AM.
apes4us is online now   Reply With Quote
Old 12-27-2013, 12:10 PM #3
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
-----------------------------------------------
Rails

92. various rails and drop forwards - $4 ea (chrome STO in second from bottom in middle sold)

-----------------------------------------------
Chrome on/offs

93. WGP drop - $10
94. ST rail mount ASA w/ fitting - $10
SOLD 95. Dye silver - $18 SOLD
SOLD 96. WGP on/off - $12 SOLD
97. WGP ASA - $8 (1 SOLD)

-----------------------------------------------
Black ASAs

98. System X drop - $12
99. Banchmark on/off - $12
SOLD 100. CP on/off - $18 SOLD
101. unknown drop rail - $8
SOLD 102. CP rail - $12 SOLD
SOLD 103. CP on/off w/ bleed - $24 SOLD

------------------------------------------------
Universal Screw Kit. These are high quality YFS screws in both stainless and black. Great for cockers and mags, but will also be useful for all markers. Includes: 4x ASA screws, 4x ASA plugs, 4x beavertail screws, 4x trigger frame screws, and 6x grip screws in two different thread sizes. A total of 96 screws!
$24 shipped (I will ship overseas, PM me for a quote).


Autococker Parts Kit. Includes: 1 sear pin, 1 vertical ASA screw, 1 valve jam nut, 1 valve guide screw, 4x set screws for timing rods, beavertail washer, 1x o-ring rebuild kit, 10x 1 foot sections of pneumatic hose (clear, black, yellow, blue, red, green, ice blue, ice green, ice red, ice yellow), frame and beavertail screws in black and stainless.
*Two people have reported issues with my last batch of hose. If you had trouble with it, PM me and I will send you a replacement set of this new hose.*
$18 shipped (I will ship overseas, PM me for a quote).


ASA Screw Kit. These are high quality YFS screws in both stainless and black. Includes: 4x ASA screws and 4x ASA plugs. A total of 40 screws!
$15 shipped (I will ship overseas, PM me for a quote).


Grip Screw Kit. These are high quality YFS screws in both stainless and black. Includes: 6x grip screws in two different thread sizes. A total of 48 screws!
$14 shipped (I will ship overseas, PM me for a quote).


-----------------------------------------------------


Introductory price: $12 shipped (Only $10 for each additional kit!)

Introducing the all new Super Light Pump Stroke (SLPS) spring kits. These lightened springs will reduce the amount of force needed to re-cock your pump or Autococker. A lighter pump stroke means more accurate follow up shots and auto-triggering. These springs are significantly softer than any of the springs found in the other spring kits.
How do they work? The key to the system is the lightened valve spring. A lighter valve spring means less force necessary to push the valve open and release the same amount of air. Since less force is needed, you can also use a lighter hammer spring which results in less force needed to re-cock.
You no longer need to purchase an expensive set of new internals to lighten your pump stroke. During my testing the biggest gains resulted on markers using stock WGP internals! Markers using stock internals had 20% to 25% reductions in the force needed to re-cock. You may even see gains in markers using high end internals. For instance, my sniper with an AKA valve and the very light yellow hammer spring had an 11.5% reduction in pump stroke using the SLPS spring kit.
These tests were performed by measuring the FPS and force needed to re-cock on various snipers. Then the springs were replaced with SLPS springs and adjusted to shoot the same FPS without any changes to the air pressure. Once the same FPS was achieved I measured the force needed to re-cock.


What is included: a brand new SLPS spring kit with replacement valve and hammer springs.
You need an Autococker valve tool to install the kit. You can purchase one here for $12 if you don't already have one: WGP Auto Cocker Valve Tool [WGPvlvtool] - $12.00 : Celanis Paintball, Online Store
Installation: Install the SLPS valve and hammer spring. If you are unable to achieve the desired FPS using this spring, re-install the stock hammer spring and leave your IVG most of the way backed out. Lowering your input pressure will often improve efficiency and help you achieve the proper FPS.
Note: the proper term for cocker pumps is snipers. Snipers are not to be confused with the new Empire sniper which uses a Spyder style valve. These springs will NOT work on Empire Snipers or Trilogy series Autocockers.

--------------------------------------------------

These are brand new pre-98 Benchmark double finger sliders (no internals, but they do have the grip screws and set screws) in Gloss Red, Gloss Green, Gloss Blue, Gloss Purple (SOLD out), and Dust Black (I have a few in each color).
$20 shipped each!

I bought out all the remaining stock of PTP's double finger sliders. They have no more, and won't produce any more... so this is your last chance to get one! They are new old stock and have spent their life in the thick plastic bags, still some may have minor shelf wear. As a side note, these actually work great as single finger trigger frames too. If you are looking for double trigger shoes, they are available here: double trigger shoe | eBay
----------------------
Optional add-ons
Grip frame mounting screws: $1
Benchmark wrap arounds: $3 w/ purchase of a frame, or $6 individually



---------------------------------------------
These are custom made Delrin .45 grip panels. These 45 grips are CNC machined by a local Illinois machinist from ľ” thick delrin plates. This is real Delrin, not a cheapo knockoff. They are both tough and lightweight. My grips are thicker than the CCM panels are, and conform to your hands better. If you are unsure if they will fit your gun’s trigger frame, post a good picture here and we will tell you. They will fit most Autococker, Automag, and Spyder frames + more. If you are using unusually large trigger frame screws, such as 10/32, you will need to drill the holes wider just a bit. Being custom made, they have character. I used them for a full day of play recently and the smooth tops develop kind of a marbled look. They look awesome!

Price: $15 shipped per set of grips.




-------------------------------------------------------

These are the legendary Jcurt455 Autococker half block kits. What's included: delrin high flow bolt (with o-ring installed to retain the pin), delrin sled (standard 10-32 threaded), and aluminum pin.
What you need for install: half blocked cocker body, modded hammer, pump arm.
I have these in hand and they'll ship a couple of days after payment.


I do not modify bodies or pump arms, but if you post in the Airsmiths section you should easily be able to find someone to do the work.

Price: $35 shipped per kit

Note: Jcurt455 has stated the intended purpose of selling these kits is to gain capital for completing outstanding projects. I will not act as a liason between you and Jcurt455 for any projects you have pending. Do not PM me for anything related to those projects or his contact info.



Last edited by apes4us : 03-11-2014 at 11:15 AM.
apes4us is online now   Reply With Quote
Old 12-27-2013, 12:11 PM #4
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
reserved
apes4us is online now   Reply With Quote
Old 12-27-2013, 05:06 PM #5
asylum11
Dm6 Part's Whore
 
asylum11's Avatar
 
Join Date: Jun 2004
Location: Indiana
Annual Supporting Member
asylum11 supports Cereal Killerz 2
asylum11 donated to help Peyton Trent
asylum11 is playing at Living Legends V
asylum11 supports Team VICIOUS
asylum11 supports Team VICIOUS
asylum11 supports Team VICIOUS
still have the stick 3's in gray and black?? lmk
__________________
Trust +188/-0

Paintball, my antidrug. Because when you're addicted to paintball there's no way you can afford drugs

PBN Feedback #1

"Originally posted by TheColiseum71: The Etek is a much better gun that the Protege. It has a better asa, it comes in a better case, and it has three LED lights, as opposed to one."
"Sometimes, i will get a bag of cheeseburgers and sit down in here and just whack off all day long, even eat them at the same time!!...Hey!...don't you judge me"--Rob Riggle "Blackballed the Movie"
asylum11 is offline   Reply With Quote
Old 12-27-2013, 05:08 PM #6
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
The black ones on the left are sold, but the gray ones on the right are available.
apes4us is online now   Reply With Quote
Old 12-30-2013, 11:08 PM #7
bcnate
 
 
Join Date: Dec 2013
Will Benchmark double finger sliders fit 2k3 cocker body?
bcnate is offline   Reply With Quote
Old 12-31-2013, 07:33 AM #8
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
Yes, they will. They'll fit any cocker, in fact.
apes4us is online now   Reply With Quote
Old 01-15-2014, 01:08 PM #9
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
bump!
apes4us is online now   Reply With Quote
Old 01-23-2014, 06:25 PM #10
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
bump!
apes4us is online now   Reply With Quote
Old 01-29-2014, 05:16 PM #11
lucchi1231
 
 
Join Date: Jan 2014
pm me on the dye auto cocker barrel set.
lucchi1231 is offline   Reply With Quote
Old 01-29-2014, 05:24 PM #12
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
Hmmm, I don't have a Dye barrel kit listed, please let me know the part number.
apes4us is online now   Reply With Quote
Old 03-11-2014, 11:15 AM #13
apes4us
MO
 
apes4us's Avatar
 
Join Date: Jan 2008
bump!
apes4us is online now   Reply With Quote
ReplyGold Ups


Rules for Buy/Sell/Trade Forums
  1. Buy/Sell/Trade here on PbNation at your own risk. We assume no responsibility for any part of any transaction. Never send money or product before a deal is agreed to by both sides and full contact information is exchanged and verified. Do not rely on PM's. If the other party is unwilling to share contact information, then don't deal with them. Please read more B/S/T tips here.
  2. If you feel that you could offer a better deal, then make a new thread in the correct forum with your ad. Never post your item in another user's thread and ruin their chances at selling their gear. Do not post negative comments about someone else's item for sale even about their price.
  3. No flaming at all. Please be polite to both the seller and potential buyers. If you donít like something being sold or the price the seller is asking, go to another thread and simply donít post in theirs. Sellers also have an obligation to be polite to users who post in the thread. If it is a scam or violates our rules, report the post and specify in detail what is improper.
  4. We recommend you always check for new and old PbN feedback as well as the Theft Report Forum before considering any deal here.
If you have questions, please post them in the Talk to Mods/Admins section. Please read and follow the complete Terms of Service and the complete B/S/T Rules as well. Most B/S/T questions are answered in the PbNation FAQ.

Thread Tools

Posting Rules
Forum Jump