Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 04-13-2013, 11:18 PM #190
Screaming4vengence
Suicide King
 
Screaming4vengence's Avatar
 
Join Date: Oct 2012
Location: near pevs aldie
Screaming4vengence supports Pev's Paintball
Screaming4vengence has achieved Level 2 in PbNation Pursuit
Looks sweet
__________________
I give up, the utter fanboy retardism is to much for my logical senses to bare
Screaming4vengence is online now   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-14-2013, 08:14 PM #191
regulatorz21
pow pow
 
regulatorz21's Avatar
 
Join Date: Jan 2002
Location: Covington, La.
 has been a member for 10 years
regulatorz21 helped look for balloons
regulatorz21 plays in the APPA D4 division
anyone in here using a pooty bolt and notice and improvement over the stock flat faced bolt?

Also, my gun has less than a case on it and the stock bolt is developing scratching on it already. Is this normal?
__________________
www.paintball-command.com


Last edited by regulatorz21 : 04-14-2013 at 08:19 PM.
regulatorz21 is offline   Reply With Quote
Old 04-14-2013, 08:22 PM #192
Dabomber
My Name Is Brandon
 
Dabomber's Avatar
 
Join Date: May 2012
Location: Raleigh,NC
Dabomber owns a Planet Eclipse Ego
Dabomber owns a Planet Eclipse Lv1
Dabomber supports Team VICIOUS
Dabomber supports DLX Technology
If u want to be added to the facebook group please pm me asap jerseys are coming people and we are more active in the fb group just hit 100 members on there!
__________________
Brandon R Markbreiter | Vapor Vendetta | EPL IS GAY
Dabomber is offline   Reply With Quote
Old 04-17-2013, 01:36 PM #193
shirls34
 
 
shirls34's Avatar
 
Join Date: Jul 2012
Location: Ruston, LA
shirls34 plays in the PSP
shirls34 supports Team VICIOUS
shirls34 is an NCPA player
shirls34 supports DLX Technology
What's the best optimum pressure from your reg to run a v3 vapor on?
__________________
Setup
RL LUXE 2.0
NINJA Turtle OLED

LOUISIANA ROYALS

LUXEMOB
shirls34 is offline   Reply With Quote
Old 04-17-2013, 10:32 PM #194
dgusa
 
 
dgusa's Avatar
 
Join Date: Jul 2010
Location: Des Moines, Ia
dgusa donated to help Peyton Trent
dgusa supports Team VICIOUS
dgusa supports Team VICIOUS
dgusa has achieved Level 1 in PbNation Pursuit
dgusa has achieved Level 2 in PbNation Pursuit
dgusa has achieved Level 3 in PbNation Pursuit
Quote:
Originally Posted by shirls34 View Post
What's the best optimum pressure from your reg to run a v3 vapor on?
I run 550 and have no issues.
__________________
Vicious Breast Cancer Geo3 & 2014 Vapor
Purple/Gold V1 Vapor
Resurrection Autococker
Chiefs T2
Vapor Vendetta
dgusa is offline   Reply With Quote
Old 04-17-2013, 11:00 PM #195
ProMod
Gun Tech
 
ProMod's Avatar
 
Join Date: May 2007
Location: New Jersey
Annual Supporting Member
ProMod owns a Planet Eclipse Lv1
ProMod is an NCPA player
ProMod supports DLX Technology
anything between 350 and 550 is fair game.

SLP (275) causes shootdown, 600+ causes bad things to happen.
__________________
2014 Vapor Breakdown Video
ProMod's Marker Repair Thread,
Vapor Breakdown, and Vapor Tuning Guide
Originally posted by msonic- Think of Simon as Paintball's Tony Stark. For real.
"...Looks Like A...." earns you an instant NEWBIE tag. Don't be a newbie.
ProMod is offline   Reply With Quote
Old 04-18-2013, 01:15 PM #196
symes
 
 
symes's Avatar
 
Join Date: May 2008
I have ordered a V3 Vapor I will have it tomorrow I am using a Ninga reg I have removed the 2 red shims so PSI will be about 500
I have another bottle with a Ninga reg on which is about 800 PSI
Will the Vapor work on both these Regs & what is the ideal PSI to run the Vapor
Thanks Symes
symes is offline   Reply With Quote
Old 04-18-2013, 04:12 PM #197
ProMod
Gun Tech
 
ProMod's Avatar
 
Join Date: May 2007
Location: New Jersey
Annual Supporting Member
ProMod owns a Planet Eclipse Lv1
ProMod is an NCPA player
ProMod supports DLX Technology
Quote:
Originally Posted by symes View Post
I have ordered a V3 Vapor I will have it tomorrow I am using a Ninga reg I have removed the 2 red shims so PSI will be about 500
I have another bottle with a Ninga reg on which is about 800 PSI
Will the Vapor work on both these Regs & what is the ideal PSI to run the Vapor
Thanks Symes
Congrats on the new vapor! Please read the post above yours.
__________________
2014 Vapor Breakdown Video
ProMod's Marker Repair Thread,
Vapor Breakdown, and Vapor Tuning Guide
Originally posted by msonic- Think of Simon as Paintball's Tony Stark. For real.
"...Looks Like A...." earns you an instant NEWBIE tag. Don't be a newbie.
ProMod is offline   Reply With Quote
Old 04-18-2013, 05:03 PM #198
symes
 
 
symes's Avatar
 
Join Date: May 2008
Quote:
Originally Posted by ProMod View Post
Congrats on the new vapor! Please read the post above yours.
Thanks for your quick reply what would happen if I aired it up with the Reg that is running at 800 PSI as I don't have air in the bottle of the other Reg I have heard of others running there Vapors at 800 PSI with no problems. I also have a 2013 Demon & use both Regs with no problems. Or should I not risk it & wait until I have Air in the 500 PSI bottle & remove the shims in the other
Thanks Symes
symes is offline   Reply With Quote
Old 04-19-2013, 06:20 AM #199
dgusa
 
 
dgusa's Avatar
 
Join Date: Jul 2010
Location: Des Moines, Ia
dgusa donated to help Peyton Trent
dgusa supports Team VICIOUS
dgusa supports Team VICIOUS
dgusa has achieved Level 1 in PbNation Pursuit
dgusa has achieved Level 2 in PbNation Pursuit
dgusa has achieved Level 3 in PbNation Pursuit
Quote:
Originally Posted by symes View Post
Thanks for your quick reply what would happen if I aired it up with the Reg that is running at 800 PSI as I don't have air in the bottle of the other Reg I have heard of others running there Vapors at 800 PSI with no problems. I also have a 2013 Demon & use both Regs with no problems. Or should I not risk it & wait until I have Air in the 500 PSI bottle & remove the shims in the other
Thanks Symes
800 = very bad things. I would seriously question that anyone is using 800psi. 550 man.... 550.
__________________
Vicious Breast Cancer Geo3 & 2014 Vapor
Purple/Gold V1 Vapor
Resurrection Autococker
Chiefs T2
Vapor Vendetta
dgusa is offline   Reply With Quote
Old 04-19-2013, 07:21 AM #200
symes
 
 
symes's Avatar
 
Join Date: May 2008
Quote:
Originally Posted by dgusa View Post
800 = very bad things. I would seriously question that anyone is using 800psi. 550 man.... 550.
Thanks mate I will leave be & wait until I get some Air next month
Thanks again guys I just can't wait to get home from work & hopefully the postman has left my Vapor with the neighbor
symes is offline   Reply With Quote
Old 04-19-2013, 07:27 AM #201
symes
 
 
symes's Avatar
 
Join Date: May 2008
This was a question that I asked Jason wheeler
1 question mate I have 2 air bottles 1 reg set at 600 PSI & the other at 800 PSI will it run on both cheers Symes
& his reply
I use a 800 psi bottle on mine mate and never had any problems, worst case is you need to add some shims for the low pressure one but that's easily done
symes is offline   Reply With Quote
Old 04-19-2013, 09:05 AM #202
ProMod
Gun Tech
 
ProMod's Avatar
 
Join Date: May 2007
Location: New Jersey
Annual Supporting Member
ProMod owns a Planet Eclipse Lv1
ProMod is an NCPA player
ProMod supports DLX Technology
Yea, no.

Nobody is putting 800PSI through a vapor because the solenoid safety vents at 650. His reg might be outputting right at 650, but I can guarantee you it's not outputting 800.
__________________
2014 Vapor Breakdown Video
ProMod's Marker Repair Thread,
Vapor Breakdown, and Vapor Tuning Guide
Originally posted by msonic- Think of Simon as Paintball's Tony Stark. For real.
"...Looks Like A...." earns you an instant NEWBIE tag. Don't be a newbie.
ProMod is offline   Reply With Quote
Old 04-19-2013, 10:48 AM #203
symes
 
 
symes's Avatar
 
Join Date: May 2008
Quote:
Originally Posted by ProMod View Post
Yea, no.

Nobody is putting 800PSI through a vapor because the solenoid safety vents at 650. His reg might be outputting right at 650, but I can guarantee you it's not outputting 800.
Thanks again I will wait until I get Air in the Ninga reg that I have removed the 2 red Shims which should be about 500 PSI according to Ninga & remove the other 2 Shims from the other & will post pictures up of my New Vapor I am looking forward to shooting her at Warped Big Game on the 3rd of May
Thanks again ProMod
symes is offline   Reply With Quote
Old 04-19-2013, 11:32 AM #204
TheHef
 
 
TheHef's Avatar
 
Join Date: Jun 2006
Location: Las Vegas
Quote:
Originally Posted by ProMod View Post
Yea, no.

Nobody is putting 800PSI through a vapor because the solenoid safety vents at 650. His reg might be outputting right at 650, but I can guarantee you it's not outputting 800.
Wouldn't the noid only vent if the regulator on the gun was set above 650? I doubt that any high end gun is operating off the output pressure of a tank reg.
__________________
Vanquish 1.5 and DM7

http://www.pbnation.com/showthread.p...6#post80475666
TheHef is offline   Reply With Quote
Old 04-19-2013, 12:20 PM #205
ProMod
Gun Tech
 
ProMod's Avatar
 
Join Date: May 2007
Location: New Jersey
Annual Supporting Member
ProMod owns a Planet Eclipse Lv1
ProMod is an NCPA player
ProMod supports DLX Technology
Quote:
Originally Posted by TheHef View Post
Wouldn't the noid only vent if the regulator on the gun was set above 650? I doubt that any high end gun is operating off the output pressure of a tank reg.
800 PSI blows past the poly orings in the reg and goes straight to the noid (which causes it to safety-vent). It's more of a fail-safe than anything else because at 800 PSI you risk blowing out the frame/body seals.
__________________
2014 Vapor Breakdown Video
ProMod's Marker Repair Thread,
Vapor Breakdown, and Vapor Tuning Guide
Originally posted by msonic- Think of Simon as Paintball's Tony Stark. For real.
"...Looks Like A...." earns you an instant NEWBIE tag. Don't be a newbie.
ProMod is offline   Reply With Quote
Old 04-19-2013, 12:26 PM #206
symes
 
 
symes's Avatar
 
Join Date: May 2008
Quote:
Originally Posted by ProMod View Post
800 PSI blows past the poly orings in the reg and goes straight to the noid (which causes it to safety-vent). It's more of a fail-safe than anything else because at 800 PSI you risk blowing out the frame/body seals.
She looks so sweet just goto work out how to put a photo on
Thanks again guys 😀😃
symes is offline   Reply With Quote
Old 04-19-2013, 12:32 PM #207
symes
 
 
symes's Avatar
 
Join Date: May 2008
She looks good just goto wait 2 weeks until I get some Air
Thanks guys

Last edited by symes : 04-20-2013 at 09:58 AM.
symes is offline   Reply With Quote
Old 04-19-2013, 06:59 PM #208
Screaming4vengence
Suicide King
 
Screaming4vengence's Avatar
 
Join Date: Oct 2012
Location: near pevs aldie
Screaming4vengence supports Pev's Paintball
Screaming4vengence has achieved Level 2 in PbNation Pursuit
may I recommend the new black ninja tanks?

and hold up does your compartment latch? mine just flaps around!
__________________
I give up, the utter fanboy retardism is to much for my logical senses to bare

Last edited by Screaming4vengence : 04-19-2013 at 07:12 PM.
Screaming4vengence is online now   Reply With Quote
Old 04-20-2013, 03:44 AM #209
symes
 
 
symes's Avatar
 
Join Date: May 2008
Quote:
Originally Posted by Screaming4vengence View Post
may I recommend the new black ninja tanks?

and hold up does your compartment latch? mine just flaps around!
Latch is fine mate only had a quick look as I was going away for the weekend
symes is offline   Reply With Quote
Old 04-20-2013, 03:38 PM #210
travisg772
Str8Killa
 
travisg772's Avatar
 
Join Date: Feb 2007
Location: Lake Norman NC
travisg772 supports Team VICIOUS
travisg772 supports DLX Technology
Anyone know how to tighten the asa? There seems to be two screws and I can only get to one of them from the bottom...
__________________

VAPOR VENDETTA
After Hours Crew #10
travisg772 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump