[mas11j]

My axe is doing the strangest thing. Air up without leaks it shoot like I have the reg get to friggin less then 10 psi. Just a small poof. Not even enough to feel just enough to cycle. My reg
psi is about 100
board is stock settings
All stock internals
Broke the whole thing down except the reg and it didn't change a think
Nothing changes with I adjust the velocity adjustment screw, no change in sound or air fired

Please don't post if you don't know what our talking about or didn't read what my problem is.

[private_silver]

When you say velocity adjustment "screw", are you referring to the back cap or to the brass bit in the front of the reg? It's no wonder its just giving a little puff if you're only feeding it 100 psi.

[mas11j]

Velocity adjustment screw= only thing on the gun that says velocity. My reg is set at 100 psi.

[Thecure1221]

Originally Posted by mas11j

Velocity adjustment screw= only thing on the gun that says velocity. My reg is set at 100 psi.

Lol your reg should be at 180 psi.

[mas11j]

Gotcha. Attempt #2

[private_silver]

When most people have the Axe tuned, you don't use the "velocity adjustment screw". Since you were snippy about who you wanted to reply, I figured you would have already known that, apologies.

But yes, stock should be 180-200. Even says so in the manual I'm oh so sure you read thoroughly.

[mas11j]

Annnd now my selenoids stuck open.suuuuuck

[Buster Hymen]

Originally Posted by mas11j

Annnd now my selenoids stuck open.suuuuuck

Sounds like karma.........contact Kee.

[blueshifty]

Originally Posted by mas11j

Annnd now my selenoids stuck open.suuuuuck

Follow the guide in the manual and reset the solenoid. (Air off, eyes off, click the noid a few times, then air it up)