Readin about the invasion is this true

ilikegunz · 03-11-2013, 02:49 PM

Hey guys I am reading about the invasion and appraently people are saying that you can't run a high pressure outputting tank on it........So that means I need a low pressure tank to make sure no damage can be done? Great....can somebody please verify this

Filmer_jake · 03-11-2013, 11:02 PM

http://www.pbnation.com/showthread.php?t=3923555

Refer to that thread.

450psi and up, so doesn't matter if you have high pressure or low pressure

WildWayz · 03-12-2013, 03:38 AM

Maybe NOT the 1200psi tanks tho, ie ones used on old Mags

Jack Rice · 03-13-2013, 10:53 AM

Quote:

Originally Posted by Filmer_jake

http://www.pbnation.com/showthread.php?t=3923555 450psi and up,

You can use the 275 tanks too.
Don't know why or where you would have read that some tanks don't work. Seems that some just want to try to find a reason the guns don't work. Anyway we work real hard to make them easy to use.

griffan2 · 03-14-2013, 12:45 AM

mine blasts from 250 to 950 just fine. seems to like right around 500 though (idk, feels different to me for some reason). glad you decided to pull the trigger on that invasion. your going to love it.

Thotograph · 03-27-2013, 01:35 PM

Just consider that you have a small amount of volume between the tank and the regulator.... with that in mind I'd say high pressure is preferred so the gun can't be starved at high rates of fire. If you can roll your gun in uncapped semi you gotta keep it well fed air wise.

My gun was incredibly consistent over the chrono with a standard Ninja reg with one shim removed (so roughly 700psi). And this was the first time I played with the gun. I was using good paint, which also helps but I'd say stick with the tanks that let you adjust output (remove/add shims) and see what works best for you.

If you have a set HP tank... don't sweat it. Just play paintball and not worry b/c the gun is ACES!