Dm7 leak from flow plug

WRATH20 · 03-08-2013, 08:19 PM

So far Ive replaced the 3 orings on the cp flow plug as well as all of the orings on the bolt and the result is exactly the same. Once I even slightly pressurize the gun, I get a bad leak that comes out of the area around the sides of the flow plug. I'm out of ideas on what to do and any help would be appreciated

grss429 · 03-08-2013, 08:59 PM

Quote:

Originally Posted by WRATH20

So far Ive replaced the 3 orings on the cp flow plug as well as all of the orings on the bolt and the result is exactly the same. Once I even slightly pressurize the gun, I get a bad leak that comes out of the area around the sides of the flow plug. I'm out of ideas on what to do and any help would be appreciated

Do you have the stock on/off? to try maybe you're not using the correct size orings on the flow plug and make sure the set screw is tight so the flow plug doesn't blow out

As well as reset your reg it could be too much pressure..

WRATH20 · 03-08-2013, 09:22 PM

Yeah I tried lowering my reg pressure, and it didn't work. I don't have the stock on/off sadly and the set screw is definitely in there tight so it's not gonna blow out. Could it be a noid issue?

98Pro · 03-08-2013, 09:27 PM

Make sure those orings are the proper size... Sounds like they are tiny.

grss429 · 03-08-2013, 10:02 PM

Quote:

Originally Posted by WRATH20

Yeah I tried lowering my reg pressure, and it didn't work. I don't have the stock on/off sadly and the set screw is definitely in there tight so it's not gonna blow out. Could it be a noid issue?

I don't see how it can be a noid issue. i believe your orings on your CP flow plug are incorrect.

WRATH20 · 03-08-2013, 10:54 PM

Quote:

Originally Posted by grss429

I don't see how it can be a noid issue. i believe your orings on your CP flow plug are incorrect.

Seems like the cp flow plug oring was wrong like you said...the thing is, now there's a leak in the reg so I'm gonna have to look at it tomorrow, thanks for the help!

grss429 · 03-08-2013, 11:01 PM

Quote:

Originally Posted by WRATH20

Seems like the cp flow plug oring was wrong like you said...the thing is, now there's a leak in the reg so I'm gonna have to look at it tomorrow, thanks for the help!

if it's leaking out the pin hole change the 018 piston oring if you still have the hyper 2.