Redefined Virtue board NT10-11 Dwell settings SOLVED HERE
After searching on multiple threads and forums to get the right number of clicks with the Virtue redefined board, I saw a whole bunch of different answers...12 clicks, 24 clicks, 60 clicks, dwell at 6, 7, 14, 25, increments of 0.5, 0.25, 1.0 and so on.
Contacted Virtue Directly, that's what they sent me:
NT/DM Redefined Dwell Addendum
The NT/NT11/DM11/DM12 Redefined board fits in a wide array of guns. Because of this the dwell must be adjusted by the user. The dwell value is adjusted in the programming mode with a stock setting of 18ms( or 72 blinks). Below is a chart to give you an average dwell* for your marker. Remember that when setting your dwell (solid red) that the milliseconds is measured in ¼ ms so 4 blinks = 1ms.
40 is max unless they have a new firmware I dont know about.
Then I don't understand why they say 72 clicks for the DM11-13...I thought it was the same exact board? I was just about thinking of buying a DM11 and putting maybe switching boards..but I think it won't be possible after all