[4literranger485]

first wheelin' trip today. did a little mall crawl photo for you guys! lmao

[AirSin2000]

How is the ride on the lift?

I picked up an 8.8 yesterday. Plan on getting it cleaned up and ready for welding in the next week. Need to order a few parts for it, and hopefully I can have it in the Jeep in the next couple of weeks.

[WorrGamR2k1]

Jeep has been plagued with Death Wobble lately AFTER I rotated my tires and had an alignment and my passenger side front brake caliper seized.

It still has some wobble at times, but very minor. Am going to follow the process in this thread to fix it:

http://www.wranglerforum.com/f33/dia...les-78034.html

[4literranger485]

track bar bolts tight worrgam????

airsin - rode great! We did about 60 miles off road through the desert, and some mild crawling, and a massive hill climb. had a blast! I'm in bad need of some 33's and a winch! Bumpers and sliders are getting made soon!

[WorrGamR2k1]

They will be after Saturday. I'm about 150 miles from my garage, but I'm heading back then.

[trickedinferno]

Anyone on here going to the Big Meat Run this year?

[4literranger485]

when/where? Tell me more?

I just picked up the steel to make my sliders today. should knock them out next weekend then do bumpers with the next paycheck

[imped4now]

Originally Posted by DFW Rusty

Understandable! There is a big difference between trailer queens like mine and dual purpose rigs like yours! My JK used to be like that, but luckily before I really started blowing $$ on it I got my TJ trail worthy. It's been so long since I wheeled a rig I had to rely on, I probably wouldn't even know how to do it with out breaking something anymore!! lmao...

Well, the project axles are gonna start sooner than I expected. This came along and I couldn't pass it up. It'll be a long-term project and the Jeep won't go down until it's time to drop the new axles in...so at least next spring. I'll be picking this up in a few weeks:

Ruffstuff 9 housing with 14 bolt spindles. FF-Hi9/14 in the works.

[AirSin2000]

Originally Posted by imped4now

Well, the project axles are gonna start sooner than I expected. This came along and I couldn't pass it up. It'll be a long-term project and the Jeep won't go down until it's time to drop the new axles in...so at least next spring. I'll be picking this up in a few weeks:

Ruffstuff 9 housing with 14 bolt spindles. FF-Hi9/14 in the works.

I need to get this 8.8 I picked up cleaned up, and installed.

[gentimmy]

http://www.expeditionportal.com/vehi...ep-safari.html

[damunoz32]

Here's a shot from this past weekend at the beach

[PaInTeRjOe_BkO]

Hey guys I have a question. From the research I've done, Bank 1 sensor 1 on a 2000 cherokee sport would be the one after the cat, and sensor 2 is the one closest to the muffler?

[Pb4life21]

Figured I would share my rig, got a good bit of work to do before our next trip to Big Dogs opening event Icebreakers at the end of April. Just came back from rollcage work; was into paintball every weekend until I got my Jeep as my first vehicle. Still decent to drive around town and on the trails.

Started as this:



What it looks like now:





Most recent mod:

[damunoz32]

Looks great man 6" on 35's?

[p8ntfreak98]

Could be a 2.5/3in on 33s but judging by his cage he is probably rockin 35s lol

[damunoz32]

Those are definitely 35's. Look at the width of that side wall!

[p8ntfreak98]

Yea definitely looks different then my 2.5in w/ 33s lol

[Pb4life21]

Thanks for the kind compliments. Its a 2-2.5" OME HD Coils and Shocks, and 1" Daystar BL, so a total of 3". 35" KM2s, HP30/8.8, etc. Let me know if you have any questions.

[Pb4life21]

Front seats installed:



Rear bench with Hi-Lift:

[Gazz]

I don't like jeeps

[damunoz32]

cool story