Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 03-04-2013, 04:27 PM #1
Free tacos
leftoverchicken13's Avatar
Join Date: Oct 2006
Location: NYC
 has been a member for 10 years
leftoverchicken13 owns a Planet Eclipse Ego
leftoverchicken13 has achieved Level 1 in PbNation Pursuit
leftoverchicken13 has achieved Level 2 in PbNation Pursuit
Issues with Clone GT

With this cold in the north east I have been having to raise my dwell up to 15 to get my gun to shoot 300 without leaking. If I put the dwell at 12 I start raising the reg i start to hear a leak from inside the gun that only gets louder. On warmer days I was able to run a dwell of 12 no problem. I have the poly orings on the valve from the aggresive sports kits but had this issue prior to this. Tank is a pro reg ninja with all the shims out. Any help would be appreciated.

Cousins Paintball
Virtue Spire
leftoverchicken13 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 03-05-2013, 11:28 AM #2
Asylum 502
98Pro's Avatar
Join Date: Oct 2010
Location: Louisville, Kentucky
98Pro plays in the PSP
98Pro owns a Planet Eclipse Ego
98Pro owns a Planet Eclipse Lv1
98Pro plays in the APPA D4 division
Did you use the other fitted orings on your gun? Using V2 Militia Lube? Good Battery? If you have to it's better to run your gun at a dwell of 15 than over pressurized.... After you put some cases through the fitted orings in the kit it should work fine in the cold. Mine works fine in even 20* weather at 12ms dwell
3rd Place World Cup 2013 D4 RT2
3rd Place World Standings D4 RT2 2013
"Alright you guys are my ginger crew, you gotta act hard af" - Todd Martinez
Play SEPS!
98Pro is offline   Reply With Quote
Old 03-05-2013, 01:20 PM #3
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
In the cold you want to lube a tad bit heavier with a very slick lube such as the militia V2. This will help a lot.
SHOOTNPOO is offline   Reply With Quote
Old 03-05-2013, 02:07 PM #4
The_Fresh's Avatar
Join Date: Mar 2011
Location: CT
 plays in the NXL
The_Fresh plays in the APPA D3 division
The_Fresh supports Ninja Paintball
yea sounds like you are having resistance in the drivetrain so when you are raising the hpr its causing a leak probably at the noid. like eric said relube with a little more grease. id also keep the gun at 14 ms.
MacDev Militia

Boston Siege
The_Fresh is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump