ego 10 help

paintballref · 02-28-2013, 02:34 PM

So i bought 2 ego 10's from a guy here on the nation. They came in today and i was going to shoot them. Neither one of them would shoot. The guns were very cold, when i unboxed them. They seem to be getting air with no leaks, but they will not attempt to cycle. One of them you can hear the noid clicking with air, and nothing on the other. Training mode is off, and so are the eyes. Any help would be nice.

Knezzerr13 · 02-28-2013, 06:57 PM

Check to make sure the regulators aren't closed too much

paintballref · 02-28-2013, 07:42 PM

I have and nothing it's like there not getting air but everything seems to be open

Lt. Tank · 02-28-2013, 08:55 PM

fresh bat
stock settings
check reg

Alvecchio · 02-28-2013, 08:57 PM

Also check the screen and make sure the trigger is actually tripping whatever method it's using.

Check the wiring as well.

paintballref · 02-28-2013, 09:35 PM

Done all of the above :/

paintballref · 03-01-2013, 02:01 AM

So I got one of them goin just by cleaning the lot and gassing it up. It was acting as if lot was hung an then all a sudden it started firing. However the other is still doin nothing. Just barely tripping the noid. I've got a new battery, cleaned and lubed everything. The guy I got them from said they hadn't been shot in over a year. Could the noid be stopped up or something?