Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-25-2013, 02:01 PM #1
CousinVin
PMP's FOR LIFE
 
CousinVin's Avatar
 
Join Date: Jul 2008
Location: Kingston Ny
Slow ASA leak. (Clone)

I've had this issue for a while and never addressed it. Upon screwing my tank into the asa and turning it on, it leaks out of the ASA. i have taken the hose out, pulled the fitting, taken the entire ASA apart and cleaned it, and it still leaks. Any clues on what this could be? It sound like it is coming from the front-middle of the asa.
CousinVin is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-25-2013, 02:53 PM #2
pjerzy1
Aspiring Gun Whore
 
pjerzy1's Avatar
 
Join Date: Mar 2009
Location: SE MI
pjerzy1 is an NCPA player
pjerzy1 plays in the APPA D4 division
Does it only leak when turning the ASA on and then stop when the ASA knob is screwed in the entire way? That is normal.
__________________
EMU Paintball

Remember kids, YOUR MOUTH CANT GET PREGNANT
pjerzy1 is offline   Reply With Quote
Old 02-25-2013, 03:36 PM #3
CousinVin
PMP's FOR LIFE
 
CousinVin's Avatar
 
Join Date: Jul 2008
Location: Kingston Ny
No it keeps doing it. It does slow down but never stops
CousinVin is offline   Reply With Quote
Old 02-26-2013, 06:45 PM #4
The_Fresh
Trollin' the trolls.
 
The_Fresh's Avatar
 
Join Date: Mar 2011
Location: CT
Annual Supporting Member
The_Fresh plays in the PSP
The_Fresh plays in the APPA D4 division
The_Fresh has achieved Level 3 in PbNation Pursuit
The_Fresh supports DLX Technology
The_Fresh supports Empire
there are 2 o rings that are on the inside of the asa wheel. one on the outside and one on the inside. make sure you arent missing that middle one and that it faces away from the tank and its the one that the pin goes through. next, there is an o ring inside of the macro fitting itself. split it in half using a screw driver, take a pic and pull out the o ring. just change the o ring or make sure its good and lube it. also make sure the hose you have is cut perfectly straight. any edging or curves or if its not cut straight will make a hose leak. i would replace both asa wheel o rings and the one inside of the fitting and lube.
__________________
MacDev Militia
The_Fresh is offline   Reply With Quote
Old 02-27-2013, 03:30 PM #5
Harribo
 
 
Harribo's Avatar
 
Join Date: Aug 2009
Location: Norway
It may be the oring on your tank regulator. Check that first and see if it helps to replace it.
__________________
Macdev Clone VX Brown/white
Safer 73/45 with Ninja SLP.
Harribo is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump