[Captainhammertime]

Originally Posted by PbN_AutoTrader

Looks better than I expected has the virtue board. fun fun

Very sexy gat!

[913boyd]

Very Nice!!!!

[Bussey]

Originally Posted by PbN_AutoTrader

Looks better than I expected has the virtue board. fun fun

Virtue board? Tell me more! Maybe some pics?

[ProMod]

Originally Posted by Bussey

Virtue board? Tell me more! Maybe some pics?

any ego9 board will FIT in the vapor, but most aftermarket boards have 3 buttons, while the vapor only has two (so you'd have to take the grips off to change modes or turn your eyes off....silly). Virtue has an EGO9 OLED board with two buttons that fits in perfectly. Personally, I'm waiting for Tadao to make a board, but that's because I prefer Tadao.

[Bussey]

Originally Posted by ProMod

any ego9 board will FIT in the vapor, but most aftermarket boards have 3 buttons, while the vapor only has two (so you'd have to take the grips off to change modes or turn your eyes off....silly). Virtue has an EGO9 OLED board with two buttons that fits in perfectly. Personally, I'm waiting for Tadao to make a board, but that's because I prefer Tadao.

I myself have no problem with the ape board in the vapor, it just takes a few days of getting used to and learning how I navigate.

[VooDoo_Weazel]

so where does the o-ring go that came with the v3 parts....I have my red can, installed voltage reg...what do I do with that shiny new oring?

[Vissa]

Originally Posted by VooDoo_Weazel

so where does the o-ring go that came with the v3 parts....I have my red can, installed voltage reg...what do I do with that shiny new oring?

Look in the breach of your marker. There are 2 o-rings, one on the boltside, one on the barrelside.

Replace the front o-ring, closest to the barrel, with the ,,V3'' one!

[VooDoo_Weazel]

alright thanks, I thought that might be it but wanted to be sure

[lucas05pty]

need some help, always after air it up, my first trigger pull is a dry fire, the second is a very weak an inconsistent shot, them the third is ok. dont know how to fix the FSDO?

[ProMod]

Originally Posted by lucas05pty

need some help, always after air it up, my first trigger pull is a dry fire, the second is a very weak an inconsistent shot, them the third is ok. dont know how to fix the FSDO?

re-lube your bolt, up your dwell by 2ms, set your ABS Dwell to 2, ABS Timer to 10

I'd also make sure you're using a fresh battery.

[rowdyh91]

Originally Posted by ProMod

I would replace the bolt sail oring (016) and the rear bolt guide oring (013)


It could also be your HPR, but I'd leave that alone for the time being.

Replaced those two orings and it works amazing now, thanks again!

[ice1124]

Need help practice to day and only getting about 5 pods plus hopper at 3500 of air. Please post some settings on dwell and anything that can help me more shots. Plus I have Pooty bolt.

Thanks

[Captainhammertime]

Originally Posted by ice1124

Need help practice to day and only getting about 5 pods plus hopper at 3500 of air. Please post some settings on dwell and anything that can help me more shots. Plus I have Pooty bolt.

Thanks

Settings info are on the very first page of thread. ProMod posted them. Very first post in the thread actually.

[ice1124]

Got it thanks

Here is another problem. I have a small leak in the back where the vent port is at. I change all the orings, screws tight and has loctite. Every time I air up the gun there is a small leak, then when I shoot it it stops. But will have a hairline leak if I don't shoot. I swap my other bolt system from my other vapor and the same thing happens and there is still a leak. Please help

[Captainhammertime]

Originally Posted by ice1124

Got it thanks

Here is another problem. I have a small leak in the back where the vent port is at. I change all the orings, screws tight and has loctite. Every time I air up the gun there is a small leak, then when I shoot it it stops. But will have a hairline leak if I don't shoot. I swap my other bolt system from my other vapor and the same thing happens and there is still a leak. Please help

That is something ProMod will be able to help you with far better than I can

[ProMod]

The return spring in your solenoid might not be strong enough to lock the spool back without the air-assist.

It's not worth the risk, but to fix that you need to pull the solenoid apart and stretch the return spring out by about 3mm

[ice1124]

Originally Posted by ProMod

The return spring in your solenoid might not be strong enough to lock the spool back without the air-assist.

It's not worth the risk, but to fix that you need to pull the solenoid apart and stretch the return spring out by about 3mm

Thank you

[ice1124]

Originally Posted by ProMod

The return spring in your solenoid might not be strong enough to lock the spool back without the air-assist.

It's not worth the risk, but to fix that you need to pull the solenoid apart and stretch the return spring out by about 3mm

Thank you pro mod I fix it you the man. Been in paintball industry for 25 years and always learning something new.

[ProMod]

Originally Posted by ice1124

Thank you pro mod I fix it you the man. Been in paintball industry for 25 years and always learning something new.

Anytime bud, I'm here to help

[ChrisBrooks]

I have a tank with the myth2 reg on it. Will this work on a vapor or do I need to purchase a new reg, and which one if so.

[Captainhammertime]

Originally Posted by ChrisBrooks

I have a tank with the myth2 reg on it. Will this work on a vapor or do I need to purchase a new reg, and which one if so.

Not sure if it will work but if you do get a new reg get a ninja pro reg. remove shims to drop it to 450 and you're golden.