Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-19-2013, 06:50 PM #1
KronicCocker
 
 
KronicCocker's Avatar
 
Join Date: Aug 2002
Location: 508
Annual Supporting Member
 has been a member for 10 years
New viking leak!

Ok, so I purchased another viking. This one has the robtown valve installed. I was told from original owner that it leaked on first gas up but if you flipped the bolt over and gassed up it then flipped it back over it would be fine. Not so much. So I removed everything to inspect and here it is.

By the way, the leak is down the barrel and is extremely bad. Like drained 800 psi in a few seconds. I wanted to check in here to see if anything was missing or incorrect before I reinstalled.


KronicCocker is online now   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-23-2013, 11:42 PM #2
matteusz
 
 
matteusz's Avatar
 
Join Date: Aug 2006
Annual Supporting Member
its all there. Change a few orings while you have it apart. Especially the ones on the outside of the ram and the valve. Those are your most likely culprits.
matteusz is offline   Reply With Quote
Old 02-24-2013, 02:02 PM #3
KronicCocker
 
 
KronicCocker's Avatar
 
Join Date: Aug 2002
Location: 508
Annual Supporting Member
 has been a member for 10 years
Tried but still leaking. Decided to send it to dc for the leak and a tuneup. Thanks for response.
KronicCocker is online now   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump