Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-16-2012, 04:20 PM #64
Jinx18
Dynamic
 
Jinx18's Avatar
 
Join Date: Sep 2005
Location: Long Island
Jinx18 plays in the APPA D3 division
just checked back and saw these posts. I am unfamiliar with the cyborg so any updates or errors please let me know. Like burning ogre said i think what I have posted is the RX and Eliminators post is for the 07? Again I dont know much about the cyborg. thanks
__________________
East Coast Dynamic!

Gearbag Sale!!!!!
Jinx18 is offline   Reply With Quote
Old 01-30-2013, 12:31 AM #65
happy Ron
 
 
happy Ron's Avatar
 
Join Date: May 2010
happy Ron supports Pev's Paintball
can someone point where exactly to put quad orings on a drone dx? thanx in advance
happy Ron is offline   Reply With Quote
Old 02-21-2013, 08:21 PM #66
vern26
 
 
vern26's Avatar
 
Join Date: Aug 2008
Location: Hilliard, OH
Is the asa knob oring on the GT an 005 or an 006? I saw 006 in the specs above but the one that came off mine seemed to be on 005 on the oring chart.
Probably because my old eyes can't distinguish the 1/32" difference. Just want to be sure to replace with correct size
vern26 is offline   Reply With Quote
Old 02-22-2013, 07:47 AM #67
Mark S.
CHOWDAH
 
Mark S.'s Avatar
 
Join Date: May 2009
Location: NH
Annual Supporting Member
Mark S. works for a Paintball manufacturer
Mark S. plays in the APPA D4 division
Quote:
Originally Posted by vern26 View Post
Is the asa knob oring on the GT an 005 or an 006? I saw 006 in the specs above but the one that came off mine seemed to be on 005 on the oring chart.
Probably because my old eyes can't distinguish the 1/32" difference. Just want to be sure to replace with correct size
The o-ring on the GT's ASA knob is an 006.
Mark S. is offline   Reply With Quote
Old 02-23-2013, 11:45 PM #68
acabello72
 
 
acabello72's Avatar
 
Join Date: Jul 2009
Location: staten island
acabello72 is BST Legit
acabello72 is playing at Living Legends VII
acabello72 owns a Planet Eclipse GSL
Quote:
Originally Posted by happy Ron View Post
can someone point where exactly to put quad orings on a drone dx? thanx in advance
016's on the bolt. 014 (I believe) valve. 017 bolt keg inner
acabello72 is offline   Reply With Quote
Old 03-14-2013, 11:35 AM #69
Worldofpaintball
 
 
Join Date: Feb 2013
Can someone fill me in on hand fitting the orings? I watched pootys video on fitting orings on a luxe and how they should grab etc. does anyone have a video on fitting them?
Worldofpaintball is offline   Reply With Quote
Old 04-18-2013, 10:11 PM #70
tech1151
 
 
Join Date: Jul 2012
Location: BC Canada
tech1151 owns a Planet Eclipse Geo
tech1151 owns a Planet Eclipse GSL
What a great post. Many thanks.
tech1151 is offline   Reply With Quote
Old 04-24-2013, 07:33 PM #71
David32270
 
 
David32270's Avatar
 
Join Date: Apr 2011
Location: Texas
Annual Supporting Member
David32270 is for the Gunfight
David32270 has achieved Level 1 in PbNation Pursuit
David32270 has perfected Level 1 in PbNation Pursuit
David32270 has achieved Level 2 in PbNation Pursuit
Question know that this been test and re test what oring sholud you Guys recomend to change for vitons on the GT?
David32270 is offline   Reply With Quote
Old 04-24-2013, 08:00 PM #72
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
Both power tube orings
Bolt switch oring
3 valve orings

Change all these to vitons.
SHOOTNPOO is offline   Reply With Quote
Old 09-26-2013, 08:37 PM #73
C@mM!
 
 
C@mM!'s Avatar
 
Join Date: Feb 2013
Location: Canberra, Australia
Has anyone got a list of what style and size 0-Ring (viton, poly, etc) should be used on which part for GT's?
C@mM! is offline   Reply With Quote
Old 09-26-2013, 10:46 PM #74
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
I have listed this out about 100 times but never stickied it
SHOOTNPOO is offline   Reply With Quote
Old 10-22-2013, 01:53 AM #75
dominantgazelle
Cal Poly San Luis Obispo
 
dominantgazelle's Avatar
 
Join Date: Nov 2010
Location: Foothill Ranch
dominantgazelle plays in the APPA D4 division
dominantgazelle is one of the top 250 posters on PbNation
dominantgazelle supports DLX Technology
Should I use a quad-ring or a viton o-ring for the inner bolt keg?
dominantgazelle is offline   Reply With Quote
Old 10-22-2013, 04:40 AM #76
Mark S.
CHOWDAH
 
Mark S.'s Avatar
 
Join Date: May 2009
Location: NH
Annual Supporting Member
Mark S. works for a Paintball manufacturer
Mark S. plays in the APPA D4 division
Quote:
Originally Posted by dominantgazelle View Post
Should I use a quad-ring or a viton o-ring for the inner bolt keg?
Neither...use normal factory buna 70 duro for the bolt keg inner and spacer. Quad orings are terrible IMO.
Mark S. is offline   Reply With Quote
Old 10-22-2013, 10:32 PM #77
Giruc
 
 
Giruc's Avatar
 
Join Date: Jan 2008
Location: NW
Annual Supporting Member
Giruc supports Team VICIOUS
Giruc supports Team VICIOUS
Giruc supports Team VICIOUS
Giruc supports Pev's Paintball
Giruc plays in the APPA D4 division
Giruc supports DLX Technology
what is the oring above the asa what size is that?

also wat is part number 44 on the clone gt according to the macdev manual
__________________
POWERED BY
GI SPORTZ,WARPAINT, DBS ,DHP
,PBRACK ,JIMMY HICKEY PHOTOGRAPHY. SAWYERPB

PDX VEXX
PaintballNW.com
NW SOLDIER
DXS CONTROL THE GAME

Last edited by Giruc : 10-22-2013 at 10:40 PM.
Giruc is offline   Reply With Quote
Old 10-23-2013, 07:47 PM #78
Deathstick_Davis
Macdev Pimp
 
Deathstick_Davis's Avatar
 
Join Date: Jun 2011
Location: Toronto Canada
Quote:
Originally Posted by Giruc View Post
what is the oring above the asa what size is that?
As per the chart part 22 and the o-ring is a "Number 12 o-ring"

Quote:
Originally Posted by Giruc View Post
also wat is part number 44 on the clone gt according to the macdev manual
There is no part #44 according to the CloneGT Full Explosion web pdf
__________________
CANADIAN Macdev Retailer/Service and WARRANTY Centre

CANADIAN CLONE GTi UPGRADE CENTRE

http://www.smackballin.com/
http://www.facebook.com/Smackballin

Got a problem with your gun? It's probably an o-ring or lube issue
Deathstick_Davis is offline   Reply With Quote
Old 02-04-2014, 12:38 AM #79
gism17
 
 
gism17's Avatar
 
Join Date: Apr 2011
Location: AZ Four eight O
Annual Supporting Member
gism17 is BST Legit
gism17 plays in the APPA D5 division
gism17 is Legendary
gism17 supports DLX Technology
Is this the correct place for the VITON and POLY? I'm About to do a full rebuild on my personal VX and want the best oring set up I can I get!

Thanks in advance

3) Viton 017 oring (valve)

3) Polyurethane 017 orings (Valve)

2) Viton 011 (Power Tube)

2) Polyurethane 011 orings (Power Tube)
gism17 is offline   Reply With Quote
Old 04-28-2014, 06:40 AM #80
KsiazePanicz
 
 
Join Date: Apr 2014
Does anybody know what is the size of clone gt solenoid inside oring?
KsiazePanicz is offline   Reply With Quote
Old 04-28-2014, 08:51 AM #81
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
Inside spool orings are not something you can purchase from an oring manufacture.
SHOOTNPOO is offline   Reply With Quote
Old 04-28-2014, 08:56 AM #82
KsiazePanicz
 
 
Join Date: Apr 2014
is it some unstandarized size or why is that?

Is there any way to buy those orings somewhere?
KsiazePanicz is offline   Reply With Quote
Old 04-28-2014, 11:18 AM #83
SHOOTNPOO
MACDEV MASTER US TECH
 
SHOOTNPOO's Avatar
 
Join Date: Mar 2008
SHOOTNPOO works for a Paintball manufacturer
SHOOTNPOO plays in the USPL
SHOOTNPOO posts videos on PbNation
They are made specifically for the M.D. noid.

We do not sell them I'm sorry.
SHOOTNPOO is offline   Reply With Quote
Old 06-17-2014, 02:52 PM #84
ASU_gundevil777
 
 
ASU_gundevil777's Avatar
 
Join Date: Sep 2013
So I have read all the stuff regarding the Clone gt on this thread and am putting some vitons on my powertube, valve, and bolt switch. Should I put any urethanes on my drivetrain anywhere, if so where? And second question why no Vitons on the spacer?
Also just to share my knowledge with you guys I wouldn't suggest using any HNBR orings on the gt I tried some (placed them on all the 017 spots) and caused massive bolt stick and yes they were properly lubed.
Thanks this thread has been super helpful.
__________________
http://www.pbnation.com/showthread.php?p=79882890#post79882890
ASU_gundevil777 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump