Originally Posted by Hogz_5203
Does the HPA tank need to be HP or LP outlet for the Enmey??
Either one will be fine since the regulator will bring it down to operating pressure regardless of the tank regs output. My suggestion would be to get an LP tank (not the SLP though which is super low pressure) unless you need HP for another marker you own. Most of the more current markers run on LP and some even require it, so it will be better for you should you chose to use it on a different marker. You best bet IMO would be a ninja adjustable regulator. It has two shims in it and adjusts from 450 to 600 to 800 psi by adding the shims inside the reg (easy to do).