[wulf83]

I have a TM-7 and I have been using it for a while now. I bought the double trigger from BT thinking it would fix the horrible feel but it didnt. Is there anything else to fix this?

Also I have a Lapco apex ready barrel with the apex 1 tip. Is the apex 2 worth buying or is it the same thing just prettier packaging?

[kellan]

Flasc makes a double trigger. I saw it at my local shop it looked pretty nice a basic sling shape and it had little *** ball bearings where you put the trigger pin so it would probably be pretty nice.

[wulf83]

So nobody knows a way to fix the trigger on the TM-7? It feels like hot garbage.

[TheEnglishGuy]

Go with the Flasc double trigger and then do the spring mod on it. Feels 500% better and actually enables you to walk it, though imo most of the problem is related to the fact it's Hall Effect rather than Microswitch.

English

[Dan95-5.0]

try doing the trigger mod first and see if you like that. I tell ya its a world of a difference and i cant imagine how much better a good Flasc roller trigger would feel like. my head would probably explode.

[lilfry111]

Does the flasc trigger work with an APE board?

[offthahorse]

theres a trigger mod a guy did to his timmy somewhere else on this board. when to a hobby shop that carried rc parts, bought a small ball bearing with an inner diameter the same size as the trigger pin, drilled out the pin hole on his trigger, stuffed the bearing in there and proceeded to win

according to him it have him another 5-7 bps (not sure how he measured that but yea)

[Muzza80]

Trigger pen spring mod is what you want!

http://www.x7og.net/electronic-marke...igger-mod.html