a5 will no longer decock after installing double trigger
I recently purchased a double trigger and just installed it on my A5. I don't have any air in my tank, however when I cock my gun, the trigger won't decock it. Any ideas as to what may be going wrong with it?
I had the same problem after 3D printing a double-finger trigger in CAD class. What I did was ended up putting in stronger springs (just a couple I found in pens) and sanding down ever so slightly the top of the double trigger where the return spring goes (the front edge). This is preventing the trigger from swinging enough to allow the trigger to drop the sear. Hope that helped!
I ended up going to the store I bought it from and what the guy there did was he took the spring from the original trigger (the smaller of the two springs, the one that was internal) as it turns out the triggers that come with response trigger markers are stronger than the ones without response triggers or e-grips.