[ctraz]

alright so today i was shooting my geo 3 outside cause i got a new tank. i was using graffiti paint, it was around 25 degrees outside, (fahrenheit) and i lowered the dwell a little too earlier. So, i was shooting, and almost no air was coming out of the gun. i then raised the dwell a little bit. then the marker started to make the sound of air shooting through the gun, but no paint came out. the balls were then stuck in the shaft. and yes , the shaft is big enough for the paint. then, i cleared that out of the way, and then when i shot the gun, two or three balls rolled out, then the gun shot fine. but, when i shot the gun again, the paintballs ggot stuck in the barrel and exploded making a big a**. Do you know what the problem may have been?

[ctraz]

big A** mess*

[nico450r]

Turn up your sfr, thats really cold and geos and not cold friendly. I would also raise your dwell back to stock or close to it until it is broken in.

[ctraz]

how do i acces my sfr?

[ctraz]

nvm, found it on the trigger guard. Thanks!

[kmp15]

i think you should trade me your geo

[Leon0628]

if all else fails turn noid to high power

[CleanSweep]

Originally Posted by ctraz

alright so today i was shooting my geo 3 outside cause i got a new tank. i was using graffiti paint, it was around 25 degrees outside, (fahrenheit) and i lowered the dwell a little too earlier. So, i was shooting, and almost no air was coming out of the gun. i then raised the dwell a little bit. then the marker started to make the sound of air shooting through the gun, but no paint came out. the balls were then stuck in the shaft. and yes , the shaft is big enough for the paint. then, i cleared that out of the way, and then when i shot the gun, two or three balls rolled out, then the gun shot fine. but, when i shot the gun again, the paintballs ggot stuck in the barrel and exploded making a big a**. Do you know what the problem may have been?

You experienced first shot drop off. Counter act this by turning noid power to high, resetting dwell to stock and, turning the sfr up. In short, the cold thickens the lube when the bolt is not moving and more power is needed to get the bolt running right. This is what happens to spoolies in the cold.

[ctraz]

would it all be normal if i played in normal weather?

[CleanSweep]

Yeah if it is not freezing you don't have to do the adjustments