Originally Posted by sight.shooter
I just put another Bolt or my Teammate gt and still lucking my gt.. The Gun is practically new, no more than 5 cases used..
Just so I understand, you moved the entire drivetrain from your teammate's GT into your GT, and it's still leaking between the body and the frame?
If so, there are a few more things to check.
- Beneath the regulator there is a black screw that secures the reg housing to the frame. There is a 4x1 o-ring at the base of that screw. Check/replace that o-ring.
- Make sure subplate B is secure and not loose. Make sure neither of the screws securing the subplate to the body are snug.
- Check the 3 o-rings below the noid.
- Check the o-rings on subplates A & B.
That's basically all that it could be and you might just have to use some trial and error.
You always have the option of sending the GT into a tech center to have it looked at.