[JeffersonLeal]

Originally Posted by Bill

Discount the eye and solenoid wires. If it stops one of them could be grounding out.

Bill, after last comment I only removed the battery, and today I connect the battery and turn on, and it is working, but after 8 minutes is lock again.
While linked I did the following: After I turn on, the BBSS Disabled and fired about 450 shots, after this i started "game timer" at 7:10 minutes, but in 0:54 is lock again.
Now is lock again in few seconds.

PS. I Discounted eye and solenoid wires not work, lock too.

[moreno13]

Hey Bill,

I recently got an 09 ego and has not been able to shoot. it has a check it rammer and a tech t hush bolt. every time i air it up and try to shoot it barley had enough pressure to push the ball out of the barrel. ive tried messing with the lpr and hpr and nothing. reverted it back to factory settings and it didnt shoot at all. tried switching regulators and still barley shoots out of the barrel. i have also tried messing with the dwell and still nothing. please help!?!?

[joker12187]

i have a 08 ego, and i just saw a post about the faulty reg swivel thing, and i looked at the reg swivel on mine and im like 90% sure its the faulty one..how can i go about to get another one?

[xgreyfox]

My friend has an ego 9 he lent me to tech
And for whatever reason it wouldn't fire, I took my battery out of my ego 11 and replaced it into his, turned on the board- off the eyes and proceded to fire the gun and nothing. I reset his board to factory settings and still nothing....

I proceded to connect his gun to my 11 took a shoot and bang fired, procceded to reconstruct his gun and now it shoots like nothing was wrong with it.

What could have been wrong with his gun ?

[Russian_BulletMMA]

i have an e-portal device and an ego 11, for some reason e-portal isnt picking up my gun. the gun is connected but it cant be discovered

[dezz-nutz]

Originally Posted by Bill

Most aftermarket triggers will fit both but the EGO7 trigger wont fit without slight modification. The top and activation arms are a bit different.

Talking about trigger for a 08 ego

U said Most aftermarket trigger for what year interchange if u dont mind letting me know

[monkeyspirithand]

Been shooting an Ego11 for 2 years now and recently it wont shoot above 200. About a month ago it wouldnt shoot above 260 and now its down to 200. I've checked the hpr, lpr, board, rammer, and bolt and I dont believe the problem is with any of them. Any advice?

[joker12187]

Originally Posted by monkeyspirithand

Been shooting an Ego11 for 2 years now and recently it wont shoot above 200. About a month ago it wouldnt shoot above 260 and now its down to 200. I've checked the hpr, lpr, board, rammer, and bolt and I dont believe the problem is with any of them. Any advice?

battery? id try that first

[bigandugly]

I recently returned as an Ego owner, now with an Ego10. So here's a stupid question: Does it matter what kind of 9volt battery I use? My local shop sells "Energy Paintball" branded batteries...does it make a difference?

[michael1]

i just got an 07ego today an it was shooting fine for a little bit an now it wont shoot over 220 if u can help it would be greatly aprcated

[Bill]

Originally Posted by JeffersonLeal

Bill, after last comment I only removed the battery, and today I connect the battery and turn on, and it is working, but after 8 minutes is lock again.
While linked I did the following: After I turn on, the BBSS Disabled and fired about 450 shots, after this i started "game timer" at 7:10 minutes, but in 0:54 is lock again.
Now is lock again in few seconds.

PS. I Discounted eye and solenoid wires not work, lock too.

Sounds like you will need to have the board replaced.

[Bill]

Originally Posted by moreno13

Hey Bill,

I recently got an 09 ego and has not been able to shoot. it has a check it rammer and a tech t hush bolt. every time i air it up and try to shoot it barley had enough pressure to push the ball out of the barrel. ive tried messing with the lpr and hpr and nothing. reverted it back to factory settings and it didnt shoot at all. tried switching regulators and still barley shoots out of the barrel. i have also tried messing with the dwell and still nothing. please help!?!?

Replace all three rammer orings and clean the solenoid. Sounds like some debris may be stuck in the solenoid.

You may also want to make sure the LPR is correctly assembled.

[Bill]

Originally Posted by joker12187

i have a 08 ego, and i just saw a post about the faulty reg swivel thing, and i looked at the reg swivel on mine and im like 90% sure its the faulty one..how can i go about to get another one?

The marker is out of warranty now. Take a picture of the two rings on the opposite side of the macro fitting. I will let you know.

Is it leaking?

[Bill]

Originally Posted by xgreyfox

My friend has an ego 9 he lent me to tech
And for whatever reason it wouldn't fire, I took my battery out of my ego 11 and replaced it into his, turned on the board- off the eyes and proceded to fire the gun and nothing. I reset his board to factory settings and still nothing....

I proceded to connect his gun to my 11 took a shoot and bang fired, procceded to reconstruct his gun and now it shoots like nothing was wrong with it.

What could have been wrong with his gun ?

Most common issues are rammer orings, solenoid debris or LPR assembled wrong.

[Bill]

Originally Posted by Russian_BulletMMA

i have an e-portal device and an ego 11, for some reason e-portal isnt picking up my gun. the gun is connected but it cant be discovered

email tech@planeteclipse.com

[Bill]

Originally Posted by dezz-nutz

Talking about trigger for a 08 ego

U said Most aftermarket trigger for what year interchange if u dont mind letting me know

Most aftermarket triggers for EGO7/8 are interchangable but the stocks are not without modification.

[Bill]

Originally Posted by monkeyspirithand

Been shooting an Ego11 for 2 years now and recently it wont shoot above 200. About a month ago it wouldnt shoot above 260 and now its down to 200. I've checked the hpr, lpr, board, rammer, and bolt and I dont believe the problem is with any of them. Any advice?

New brand name battery? Change it regardless what the battery meter says. A 'cheap' battery will not work.
Did you clean, relube and change the rammer orings? I would recommend starting there.
Flip over the regulator seat inside the HPR adjuster. I would recommend getting a spare!

[Bill]

Originally Posted by bigandugly

I recently returned as an Ego owner, now with an Ego10. So here's a stupid question: Does it matter what kind of 9volt battery I use? My local shop sells "Energy Paintball" branded batteries...does it make a difference?

Energizer, Duracell or Energy only. Cheaper brands will not work. They do not have the 'upkeep' the EGO needs but will still read full.

[Bill]

Originally Posted by michael1

i just got an 07ego today an it was shooting fine for a little bit an now it wont shoot over 220 if u can help it would be greatly aprcated

Start with an Energizer or Duracell battery. It is the leading cause. A cheaper brand will not work correctly!
Change out the rammer orings and use oil.
Check the HPR piston. See if there is a small plastic like piece pressed into the end of teh shaft. If not, you need a new piston.

[kwoodpaintballer87]

Have an 05 ego that i got in a trade...didnt realize how bad of condition it was in
Long story short, noid has been punctured by both sides grip screws up front
Trying to find a good fix short of just buying another 05 for parts...(mine is an xsv so id like to get it running). Any good ideas?
Also put the dart kit in my csl. Tried adjusting pressure down a little but its really loud
Any good base settings to start at with it for a quieter shot?

[Bill]

The EGO7/8 solenoid/manifold combo will fit and work in your 05.

CSL: Lower your dwell a bit and turn the LPR in 1/2 turn.