[mcguire83]

nice guide!

[w028bjm]

Wildwayz, does the qev diaphragm need to be lubed before putting it in the manifold? If so, with what kind of lube?

[ElCoronel]

I want to say I've read where people lube the diaphragm but I recommend against it. In my experience it's easy to lube it too much making it become too soft and failing. I had this happen on a newly installed diaphragm where I had overlubed the bolt (experimenting with Mookies Urban Gun Goo).

[w028bjm]

Originally Posted by ElCoronel

I want to say I've read where people lube the diaphragm but I recommend against it. In my experience it's easy to lube it too much making it become too soft and failing. I had this happen on a newly installed diaphragm where I had overlubed the bolt (experimenting with Mookies Urban Gun Goo).

YES!! I just had this happen to me. I put a new one in two weeks ago and low and behold I got home from the field last night and wanted to shoot off what paint I had left and it was puffing, so I removed the QEV and it was really soft, just put a new one in and whoosh, just like new, Thankfully it didnt break at the field during practice

[Reaper (ACI)]

Don't Lube the QEV diaphragm.

[TwistedNerv]

When are you going to do a guide with the new bolt system?

[djtail]

when i use a 14x2 as a bumper, my bolt sticks forward soe the balls wont get in the breach....

i get less kick with an 14x2... but 017 makes the balls get down in the breach...

anyone else with this issue?

[WildWayz]

Originally Posted by TwistedNerv

When are you going to do a guide with the new bolt system?

Alas... no longer have my Demon

However, there isn't much difference between the two. Just some different orings on the new drive train.

[snakeplayer2338 (Banned)]

shoots like a god now!!!!!!!!!!!

[joshnielson]

Need to know hom much lube or no lube on the shuttle ring

[WildWayz]

Small amount on the outside of the shuttle oring (it is a moving part). I can't remember, but if there is an inner oring on the shuttle, lube that too.

[xmc1146]

If there is an oring... lube it. Kinda like a general rule in paintball guns. Other equipment though is a different story

[djtail]

were does people have Polyurethane o-rings on the 2013 setup?

[WildWayz]

Pretty sure Martin said the Polys have been changed to normal Dura ones...

[djtail]

whats the difference between using them 2? do u get a smoother shoot with dura?

[WildWayz]

I can't remember what he said - I know he said that they used the polys to try them out, then changed them back.